Premix Mud Tank Of Drilling Fluid, Drilling Premix Tank

Feb. 5, 2010 - PRLog -- GN Solids control manufacture mud tank for our own fluids processing system but also we  supply mud tank with customized desgin.We are located in China iron production City-Tangshan.The price of raw material here is very low and with high quality.There are also many experienced workforce in iron machine production.They work very efficiently. Moreover,we control mud tank production cost well by outsourcing some processing work.So buy Mud tank from us you will enjoy high quality but Good price.We are professional in manufacturing solids control system,so our mud tanks design are very compatible for mud circulation system using.

http://www.gnsolidscontrol.com/mud-tank/

Type FG and ZG Mud Tank designed and manufactured by our company is devided into Square tank and Cone-shaped tank according to the shape of tank bottom. The body of the tank is made of welding the steel plate and section, using the flat cone-shape structure or the corrugated structure. The mud tank surface and the passage are made of the slipping resistant steel plate and linearity netted steel plate which is produced by the professional factory, the mud tanks are made of the side steel pipe, all of the structure can be folded without barrier and pegged reliably. The surface of tank is equipped with water pipeline for cleaning the surface and equipment on the mud tank, we use soaked zinc processing for the netted steel plate. The ladder is made of the channel steel to take responsibility the body, the foot board is made of the linearity netted steel plate. The two-sided guard rail are installed the safe suspension hook. The mud tank is designed the standard shanty to prevent the sand and the rain. The pipeline is installed in the tank to preserve the warm air heat.

http://oilfield.gnsolidscontrol.com/complete-mud-tank-sys...

How this system works:

All of the flow from out of the well bore is directed into the clear water drilling compartment of the system where the centrifuge feed pump suctions are located.

Polymer is then injected into the centrifuge feed pumps at the suction as well as into the slurry stream coming off the rig shakers.

From the shakers the flocculated slurry stream enters the custom designed flocculation compartment of the processing system and is then introduced to the centrifuges through the feed pump suctions located at the bottom of the flocculation compartment.

This system is capable of handling volumes of up 2.2m3/min with ROP's reaching 100m/hr (using two centrifuges).

While drilling of the water section is proceeding, you have the ability to pre-mix up to 40m3 of mud in the two remaining unused compartments of the system. This allows you to have mud ready for displacement at mud-up.

The option to utilize all three compartments for pre-mix after the water section is complete is another huge benefit.

http://hi.baidu.com/solidcontrolgn/blog/category/Mud%20Tank

A mud tank is an open-top container, typically made of steel, to store drilling fluid on a drilling rig. They are also called mud pits, because they used to be nothing more than pits dug out of the earth.

The tanks are generally open-top and have walkways on top to allow a worker to traverse and inspect the level of fluid in the tanks. The walkways also allow access to other equipment mounted on top. Recently, offshore drilling rigs have closed-in tanks for safety.

A drilling rig normally have two tanks. A tank is sectioned off into compartments. A compartment may include a settling tank, sometimes called a sand trap, to allow sand and other solids in the drilling fluid to precipitate before it flows into the next compartment. Other compartments may have agitators, which are large fan blades stirring the fluid to prevent its contents from precipitating.

Mud tank for solids control

Mud tanks are the base of solids control equipments.Mud Tanks for solids control system is divided into Square tank and Cone-shaped tank according to the shape of tank bottom. The body of the tank is made of welding the steel plate and section, using the flat cone-shape structure or the corrugated structure. The mud tank surface and the passage are made of the slipping resistant steel plate and linearity netted steel plate.The mud tanks are made of the side steel pipe, all of the structure can be folded without barrier and pegged reliably. The surface of tank is equipped with water pipeline for cleaning the surface and equipment on the mud tank, it uses soaked zinc processing for the netted steel plate. The ladder is made of the channel steel to take responsibility the body, the foot board is made of the linearity netted steel plate. The two-sided guard rail are installed the safe suspension hook. The mud tank is designed the standard shanty to prevent the sand and the rain. The pipeline is installed in the tank to preserve the warm air heat.

Now we are processing a case of premix mud tank, study the parameters and compare with our parameters. We will develop our business to all of the world in oilfield industry. We also welcome you to share your technology problem with our cheif engineers.

# # #

GN-Solids control is a China solids control equipments professional manufacturer.Our solids control equipments can be used in both onshore and offshore oilfield for oil gas well drilling fluids circulation-Drilling mud complete solids control.