Fingerprint Door Lock Sleek (Right)

March 29, 2010 - PRLog -- Sleek Fingerprint Door Lock for the latest in business security and safety. A heavy gauge, all-metal door entry protection biometric door lock for use when only the highest quality security system is acceptable. If you need the presidential level protection and won't settle for anything else, look to the CVPW-J30 Fingerprint Door Lock.
Fingerprint Door Lock Sleek (Right) Specification

   * Storage Capacity: 100 fingerprints
   * Height Resolution: 500dpi
   * Angle of Finger Reading: 360 degrees
   * Unlock Method: key, fingerprint, pin code
   * Door Thickness: 35mm - 80mm, shim plates provided for thinner doors
   * Power Source: 8x AA battery
   * Static Power Consumption: 20uA
   * Dynamic Power Consumption: 180mA
   * Working Temperature: -20 - 55 Degrees C
   * Working Humidity: 0 - 95%
   * False Rejection Rate (FRR): = 1%
   * False Acceptance Rate (FAR): = 0.0001%
   * Verification and Comparison Time: = 1s

Package Included

   * Interior Lock Set
   * Exterior Lock Set
   * Mortice Lock Set with Dual Latch Bolts
   * Strike Box
   * Strike Plate
   * Shim Plates
   * Screws
   * Mechanical Key x3
   * Door Template
   * Instruction Manual - English

Helpful Tips

   * Right handed installation
   * High quality Biometric Fingerprint Security
   * Fireproof
   * Low battery alarm
   * Stick a 9V battery on the bottom for when it has no power for temporary access
   * Batteries lasts for 12 months
   * Features an On/Off button on the back. "Off" means it does not lock, so you can turn it off when you step outside for a moment and don't want to worry about swiping your finger or using your key.
   * High sensitivity, high speed recognition
   * Highest level security gadget
   * Application: Bank, security room, government use, VIP rooms

FAQ - Frequently Asked Questions

   * If I cut my finger, will the unit still work?
     We suggest you register 2 different fingers on each hand to avoid this problem, or open the door by password or key.

   * Can anyone enroll himself and have access to the system?
     No, only the person who knows the 8 digit master code (or is the administrator fingerprint - the 00 fingerprint) is authorized to enroll new users.

   * How long will the lock last on a single set of batteries?
     Under normal use (10-15 accesses per day) the fingerprint lock should operate for a year on a single set of alkaline batteries.

   * Do I have to reconfigure the lock when I replace the batteries?
     No, the system configuration and user information/data are saved in a non-volatile flash memory data and may be stored indefinitely without the need of batteries.

   * If my finger gets dirty will it still work?
     The fingerprint sensor uses RF techniques to collect data from below the skin, therefore the reading ability is not affected by dirty. It is advisable, however, to wipe dirt and sand off prior to swiping to avoid scratching the sensor's protective surface.

   * The battery is dead and I left the key is at home, what do I do?!
     There is a 9V battery connector located below the door knob at the bottom frame of the unit; a simple connection using a 9V battery will bring it back to life.

   * Is the CVPW-J30 waterproof?
     No, but it is weatherproof, meaning any moist build up from fog or frost should be fine. It is not advised to install this security lock in un-sheltered areas where direct contact with rain, hail, or snow is likely.

   * I heard this security gadget has a tamper alarm and latch bolt alarm, what is that?
     Tamper Alarm: If the exterior set outside is damaged by outside force, the buzzer will give off a continuous beep for alarming. Great for knowing when someone has tried breaking in and scaring thieves off.
     Latch Bolt Alarm: If the door is not properly closed and the latch bolt is pressed into the lock set, the alarm will sound. Useful as a reminder that the door has not been closed properly.

   * I saw the red light but I still forgot to change the battery and the key is at home, what do I do?!
     There is a 9V battery connector located below the door knob at the bottom frame of the unit; a simple connection using a 9V battery will bring it back to life.

   * I followed the instructions exactly but my fingerprints aren't being read, what's going on?
     This unit uses a swipe sensor, which is different from a press sensor. You need to slowly swipe your finger down the fingerprint reader.

   * Where is the key hole?
     On the door handle. Lift the plunger on the rear side of the exterior handle up and slide the cover to the right.

For more information, pls :

http://www.trioffer.com/fingerprint-door-lock-sleek-right...