Hydrogen Pressure Sensor Certified for Use on Fuel-Cell Vehicles

American Sensor Technologies has developed the AST 2000H2 Hydrogen ASIC Pressure Sensors for use on hydrogen-powered vehicles and in other emerging hydrogen applications.
By: American Sensor Technologies
 
Dec. 1, 2011 - PRLog -- .  The AST 2000 Hydrogen Pressure sensors are already certified for use by Merced European and Asia automobile manufacturers as on-board hydrogen sensors for fuel cell vehicles. Anticipated volume production for these vehicles will begin 2014/2015.

“Hydrogen is gaining popularity as an alternate clean fuel source for powering surface transportation such as cars, bus fleets, boats, and light trucks,” remarks Karmjit Sidhu.  “While environmentally-friendly, hydrogen poses new challenges in the types of pressure sensors that can be used safely and accurately during hydrogen service of a minimum 10 years life.”

To overcome hydrogen permeability and embrittlement, the AST 2000H2 Hydrogen Pressure Sensors employ a one-piece thick diaphragm, free of internal O-rings, welds or fill fluids, that keep hazardous media out, eliminating the chance of hydrogen permeation and eventual sensor failure.  To reduce the chance of embrittlement caused by long-term exposure to hydrogen, units are constructed from a version of high strength 316L stainless steel wetted parts that promote long life and resistance to media corrosion. AST’s proprietary Krystal Bond™ Technology further enhances performance by reducing long-term drift to just 0.25% per year.  The technology also utilizes an inorganic bond, free from glue line failure and outgassings.

Tested to a variety of hydrogen and automotive standards including TUV and EIHP, the AST2000H2 pressure sensors combine the best mechanical design for hydrogen measurement with high performance digital compensation. 79/2009/EC approval was obtained for the 2MPa range of the Model AST2000 that are used as components on the vehicle hydrogen regulator controlling hydrogen flow to the fuel cell stack.  Also approved are the 35MPa range of these pressure sensors that are typically used on Class 3 hydrogen tanks for use on buses, forklifts, cars, farm machinery, off-road vehicles and stationary back-up power systems.   In addition, the sensors have been tested under the supervision of TUV for 70Mpa range for Class 4 tanks and are awaiting EC79 approval.

For more information on the AST 2000 Hydrogen Pressure Sensors, please refer to the web site at http://www.astsensors.com/digitally_compensated_pressure_... or contact the factory at sales@astsensors.com.

# # #

American Sensor Technologies, Inc. (AST) manufactures MEMS pressure sensors, pressure transducers and pressure transmitters that offer the best price-performance ratio in the industry. .
End
Source:American Sensor Technologies
Email:***@astsensors.com
Zip:07828
Tags:Pressure Sensors Transmitters, Pressure Measurement, Fuel Cell Vehicles, Pressure Transducers
Industry:Sensors
Location:Mt. Olive - New Jersey - United States
Account Email Address Verified     Account Phone Number Verified     Disclaimer     Report Abuse
CapTemp News
Trending
Most Viewed
Daily News



Like PRLog?
9K2K1K
Click to Share