Mud gas separator in solids control

HOUSTON - May 5, 2015 - PRLog -- Mud gas separator intro

Usage of GNZYQ1000A mud gas separator (http://www.gnsolidscontrol.com/gas-liquid-separator/) is a simple and vital safety oil drilling equipment in oil drilling operation. It is just like the name suggested for use when oil drilling hit the gas pocket and it removes gas from the pocket to keep the drilling save from explosion due to flammable gas contain such as hydrogen sulfide, carbon dioxide and natural gas. The mud gas separator can   reduce the hydrostatic head of the mud column and can cause catastrophic well control problems.

Mud gas separator in theory of usage.

“Poor boy degasser” or “gas buster” is common name called by mud gas separator. It captures and separates large volume of free gas within the drilling fluid.   This container separates the mud from the gas by allowing it to flow over the baffle plate if situation happened.  The gas itself will force to flow through gas line and release it to a flare. Thesituation happens when the annular hydrostatic pressure in a drilling well temporarily (and usually relatively suddenly) falls below that of the formation, or pore, pressure in a permeable section down hole, and before control of the situation is lost.  The separated gas will move to the line at the top of the unit to be vented at far distance from the oil rig and rig operational personals.

GNZYQ1000A

GNZYQ1000A Mud gas separator (Poor Boy Degasser) is safety equipment totreat the gas invade mud (http://www.gnsolidsamerica.com/). When the drilling mud result gas invades, the proportion of its weight and viscosity has a greater deviation not to meet the requirements of drilling. The GNZYQ1000A Mud gas Separator combined with the flare Ignition unit can be used to ensure the drilling process goes smooth and meet the safety requirements of the oil rig.