Follow on Google News News By Tag * Dticorp Com * Honeywell * Vs820 * Residential * Millivolt Gas Valve * Gas Valve * Vs820a1047 * Vs820a1054 * Vs820a1088 * Vs820a133 * More Tags... Industry News News By Place Country(s) Industry News
Follow on Google News | DtiCorp.com is introducing 5 Honeywell VS820 Millivolt Gas ValvesThese gas controls combine a Lite-Rite manual gas cock, safety shutoff Pilotstat assembly, millivoltage automatic valve operator, and optional gas pressure regulator. They require the use of a 750 mv Powerpile generator (thermopile).
By: DtiCorp.com Models equipped with the standard pressure regulator are identified by the suffix letter “A“ (WS820A). Models without pressure regulator carry the suffix letter “B” (VS820B). Suffix letter “C” (VS82OC) identifies models having step opening type regulators. Pressure regulators and operator are standardized and interchangeable on all models in the two capacity ranges - 225 and 335 cubic feet per hour. Features: - Include pilot flow adjustment screw. - Easy to install, adjust and service; all adjustments and connections are accessible from top of control. - Add separate energy cutoff (ECO) where codes call for dual safety shutoff. - Complete safety shutoff on pilot flame failure. - LITE-RITE (OFF-PILOT-ON) - ECO connector for V800 models, Part No. 392451-1. Specifications: 1. These controls can be mounted 0-90 degrees, in any direction, from the upright position of the gas cock knob. 2. Install the control so that gas supply is connected to the end provided with projecting boss for wrench application. 3. After Powerpile generator is installed, route generator lead to Powerpile operator and connect to Powerpile terminals labeled PP. Make certain jumper lead from Powerpile operator to safety shutoff Pilotstat power unit is connected and tightened l/4 turn beyond finger tight. 4. The pilot flame should envelop 3/8 to l/2 inch of the tip of the thermocouple. Remove pilot adjustment cover screw. Turn inner adjustment screw clockwise to decrease or counterclockwise to increase pilot flame. 5. Check burner performance at step pressure, observing burner ignition and flame characteristics. Burner should ignite properly and without flashback to orifice, and all ports should remain lit. 6. Do not exceed input rating stamped on nameplate of appliance, or manufacturer’ 7. Make certain there is no gas flow through the meter other than to the appliance being checked. Other appliances must remain off, and the pilot extinguished (or their consumption deducted from the meter reading). 8. Put the system into operation and observe through complete cycle to be sure all controls function properly. Make certain the Pilotstat unit shuts off gas flow to main burner within 2-l/2 minutes after pilot flame is extinguished. 9. Approvals, Underwriters Laboratories Inc: UL Component Recognized 10. Approvals, American Gas Association: 11. Approvals, Canadian Gas Association: Models available: 1. VS820A1047 1/2 in. NPT x 3/4 in. NPT PowerPile Millivolt Combination Gas Valve with 3.5 in. wc adjustable pressure regulator setting 2. VS820A1054 3/4 in. NPT x 3/4 in. NPT PowerPile Millivolt Combination Gas Valve with 3.5 in. wc adjustable pressure regulator setting 3. VS820A1088 3/4 in. NPT x 3/4 in. NPT PowerPile Millivolt Combination Gas Valve with 3.5 in. wc adjustable pressure regulator setting 4. VS820A1336 3/4 in. NPT x 3/4 in. NPT PowerPile Millivolt Combination Gas Valve with 10.0 in. wc adjustable pressure regulator setting 5. VS820C1100 3/4 in. NPT x 3/4 in. NPT PowerPile Millivolt Combination Gas Valve with Step: 0.9 in. wc non-adjustable; About Us: DtiCorp.Com (http://www.DtiCorp.com) carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search, and all products have a picture and a description. If a customer has any questions about a product, they can call 800-757-5999 and speak with one of our product experts. Our mission is to offer the best prices anywhere to our customers. Julian Arhire Manager DtiCorp.com Phone: 954.484.2929 Fax: 954.206.0767 Web: http://www.DtiCorp.com # # # DtiCorp.com carries more than 35,000 HVAC products, including industrial, commercial and residential parts and equipment from Honeywell, Johnson Contols, Robertshaw, Jandy, Grundfos, Armstrong and more. Our online catalog is easy to navigate and search. End
|
|