PS3YES,PS3 YES 2Generation PS3 Jailbreak USB Dongle

Oct. 1, 2010 - PRLog -- PS3YES! can be flashed with other Hex, BUT it will lost the auto upgrade function: Plug it into PC, after 20 seconds; it can enter upgrade mode and both LEDs light. The PC will find device "AT90USB162 DFU", you can download firmware from here and use FLIP to flash it. If you install the FLIP and install drivers for "AT90USB162 DFU", you can flash HEX files that download from here and keep the "auto enter upgrade mode" function. You can flash it with any HEX file, BUT you will lose the "auto enter upgrade mode" function, after this, next time you have to do a hard upgrade. We are preparing more detail document for how to do a hard upgrade for PS3YES!.
User's Manual

System Requires:
1. PlayStation 3 Host，Firmwaer Version 3.41.
2. Install Backup Manager Package（manager.pkg），You can download at below。
3. USB storage formated as FAT32 file system.
Usage :
Step 1 : Remove all the USB devices from PS3, make sure BD disc drive is empty. Power off theconsole, and connected the PS3YES! Dongle to the PS3. .
Step 2 : Switch on PS3 again.
For the SLIM Model: You will also have to remove power chord before plugging in USB.
For the FAT Model: Switching the power off shall do.

Press the ‘Power’ button on the console and then press the ‘Eject’ button. You should notice a beep sound and from the console. If PS3YES! Dongle working properly, within few seconds the blue indication LED at PS3YES! Dongle will switch on.. If the both LEDs(blue & red) will switch on it’s not working.
The RED LED will switch on while booting.

The BLUE LED will switch on while ready.

If you just plug the PS3YES! to a PC’s USB port or ‘Jailbreak’ was failed, PS3YES! will enter upgrade mode with RED/BLUE LED were on , about 30 Seconds after boot. (It can be upgraded)

Step 3 : Once the PS3YES! loads and ready ,connect the external USB storage (with BackupManager) to the PS3.

Step 4 : Navigate to “Game Menu” and select the option” Install Package Files”. Select”manager,pkg” which will basically install back up manager for you. Install the “manager.pkg”

Step 5: Back to Game Menu, select and execute Backup Manager

Step 6: Select “YES”

Step 7: Wait for few seconds for Backup manager menu to appear, put in a original BD game discwhich you need to backup and press “O”. You will be asked then whether to make a back up on theinternal HDD or the external USB storage device.Choose “yes”, if want backup the BD game to external USB storage device.
Choose “yes”, if want to backup the BD games to PS3 build in internal hard drive.

Step 8: Backup in progress, please wait.
Step 9: After backup process back to Game Menu,and enter Backup Manager again

Step 10: To load a previously created back up, insert any original BD game disc in console thenselect the desired back up from the Back Up Manager and press “X” to play the selected game.

Without insert any original BD game disc, message below will pop out if press “X”.

Now press “X” to play the selected backup game. You can also delete your previously createdbackup by pressing triangle.

Step 11: You will automatically be redirected to the main menu where you can see the gameinstalled and ready to be played

Do not remove the PS3YES! while you play the game. It has to be connected at all the timeswhile you are playing a game through back up.

The new arrival ps3 break series :  PS3YES View!
http://www.acceshop4u.com/ps3yesps3-yes-2generation-ps3-j...