Follow on Google News News By Tag Industry News News By Place Country(s) Industry News
Follow on Google News | How do the overclocking worksToday, the overclocking is no longer a secret, but overclocking is almost become a trend. The definition is very simple overclock: OC is to make an integrated circuit out of it by the clock speed of work. Nothing more.
By: www.sales-battery.com Chip from the front-side bus speed and multiplier to clock comprehensive decision. Now, some advanced processors have been able to or higher 100 MHz front side bus clock running, and Celeron processors has remained at 66 MHz front side bus clock running. A few years ago, you can choose a higher multiplier for overclocking. But to deal with the central "remark" to fight, and now this practice has been completely cleared. Processor has been forged in the market began to regularly appear (for example, a Pentium II 266 on the outside made a new packaging, and then be labeled a Pentium II 300 marks), because the central processor speed is now by your own settings to decide. Today, the restrictions that prevent using only one multiplier for overclocking the CPU, the processor also played on the counterfeit protection. As you can see, is the only practice of overclocking is to choose a higher front side bus clock. Intel Corporation provides a 66 MHz, 100 MHz and 133 MHz, but today's motherboard provides for such a significant role in promoting improved. Now 75 MHz and 83 MHz front side bus clock is already quite common. Celeron processor front side bus overclocking requires 83 MHz clock to 100 MHz between the small amount of increase, because most of the Celerons processors in 83 MHz front side bus clock run to very good, when in 100 MHz front side bus clock to run will fail. We also still 92 MHz front side bus clock of the Celeron processor performance test, because the speed of the logic in the 83 MHz and 100 MHz between. Every time your board increase of 1 MHz (Abit BE6-II type of motherboard, BF6-based motherboard, BX133-RAID motherboard, Epox BX7 + based motherboards and other types of motherboard) Today, almost every type of central processor can exceed the speed of its own work under the mark. If you raise the voltage a little bit of the chip, then it becomes more apparent. But the problems do occur is the chip temperature will increase, so that good heat becomes very important. You increase the voltage in the process of the chip, you have to improve little by little, and the level of increase must not exceed 15%. This approach, you can very easily increase the system speed, while the processor will not have any risk. 2.1 V or 2.2 V-chip voltage for the use of Mendocino CPU chip, the test results have proved to be very safe. Higher voltage can sometimes bring the success you want, but this approach will make your CPU taking a big risk. To a Celeron 566 MHz processor, 850 MHz overclocked to run, you only need to default the processor chip voltage to 1.65 volts 1.75 volts on it. Our overclocked Celeron 600-based processor running at 900 MHz is not quite time to stabilize, so I am building all the time using the Celeron 600 processor clock speed is best to set this limit below. 1.8 V or 1.9 you can Fuseshita test, but the clock speed of 1GHz caused only by high-temperature heat sink can be resolved. Welcome to 【global-Battery.co.uk】 A excellent cheap replacement batteries source: Save more than 30%! SONY pcga-bp2v battery http://www.global- kodak klic-7002 Battery http://www.global- SONY np-ft1 battery http://www.global- # # # The Second Largest Battery Supplier On US Market We are capable to provide High Quality laptop batteries, camcorder Batteries, camera batteries, adapters and chargers in United States . 30% discount now !!! URL : UK shop: http://www.global- US shop: http://www.sales- End
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||
