sell 13.56MHz rfid reader MR810 MCU: ARM7

June 25, 2012 - PRLog -- This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.

MR810 series, based on NXP PCD, are the USB PC/SC interface smart reader. The reader supports series IC cards according to ISO14443A, ISO14443B, ISO15693 and ISO7816; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader is available to pass EMV2000 and PBOC 2.0 and be authenticated by many laboratorial certifications---Visa Wave & Pay Pass (by FIME) and the Bank Card Test Center. There are 2 SAM card slots in the reader which support SAM cards compliant with ISO7816 (T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset; SAM operation of various communication rate.

Qualifications:
PCD: NXP RC531, RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 100mm (Mifare One, typical distance)
Operating distance: 2 slots, (supports ISO7816 T=0 and T=1)
Interface: USB PC/SC
Power supply: DC5V
Power consumption: 0.9W
Dimension: 123mm*88mm*25mm
Weight: about 100g
Operating temperature: -25 ~ +85 centigrade
Storage temperature: -40 ~ +125 centigrade