Tips for using a OM520 OBD2 Scanner in VtoolShop

Aug. 23, 2012 - PRLog -- OM520 OBD 2 Scanner or the OM520 Code Reader which is a good obd ii car diagnostic tool for working on the obd-2 compliant vehicles.So, you should know some detail and the common thing of this scanner.
Here you can see the three good feature of the obd 2 om520
1.OBDMATE OM520 can used to test New model car with CAN,J1850 PWM,J1850 VPW,ISO9141 and KWP2000 protocols vehicles.
2.OBDMATE OM520 can display vehicle current trip information(Distance,Fuel used,Avg Speed).
3.Software can upgrade via internet.
You can see many car diagnostic tools online ,I think the obd 2 om520 is good in vtoolshop.why? you can see this tool http://www.vtoolshop.com/obd-code-scanners-obdmate-om520_p513.html
The main function of the om520 scanner is
-.Fashionable design, easy operation
-.Works on all 1996 and later OBDII compliant US, European and Asian vehicles
-.utilizing CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000 protocols
-.Easily determines the cause of the "Check Engine Light ( MIL)"
-. Read hard(memory)/pending(intermittent), historic codes with code definitions
-.Turns off Check Engine Light (MIL), clears codes and resets monitors
-.Reads live datastream and waveform
-.Views freeze frame data
-.I/M monitor readiness test
-.Displays live O2 sensor test data
-.Displays On-board monitor test results
-.Check if Vehicle components work status
-.Retrieves vehicle information (VIN, CIN and CVN)
-.Display Current trip Infomation (Fuel Economy,Average Fuel,Distance,Fuel used,Avg,Speed, running time)
If you like the om520 , I suggest you go to vtoolshop to have a look . And make clear that the main tips for using this scanner . because through many people can use the obd 2 om520 , but if you know how this scanner work , how to use this scanner ,you can do yourself better online in vtoolshop.
The most important thing is to check the fault code error.you can see here:
Erase Fault Codes
This function is performed with key on engine off . Do not start the engine.
Before performing this function, make sure to retrieve and record the
trouble codes.
After clearing, you should retrieve trouble codes once more or turn
ignition on and retrieve codes again. If there is still some trouble codes
for hard troubles, please find the reason caused the trouble code firstly,
and then solve the problem. Now, the trouble codes can be erased.
1) Use the UP/DOWN scroll buttons to select Erase Fault Codes from the
Diagnostic Menu and press ENTER.
Notes:
2) A warning message comes up asking for your confirmation.
3) Press ENTER to confirm.
If the codes are cleared successfully, an "Erase Done!" confirmation
message is displayed.
If the codes are not cleared, then an "Erase Failure. Turn Key on with
Engine off!" message is displayed.
I think VtoolShop http://www.vtoolshop.com which provide the om520 online is good . you can see this video about sharing the om520,it show the feature of om520.
http://www.youtube.com/watch?v=0GfYkQGxSlA



Hoping you like the om520 and can do it yourself to use the tool easily