DVD Player Repairing Manual – The Finest Guide Online

March 4, 2013 - PRLog -- Why is it so difficult to find the right DVD player repairing manual these days? Currently there are way too many manuals loaded with words and phrases, but not enough pictures and clear instructions. No wonder so many inexperienced technicians are struggling badly when it comes to fixing DVD player problems.  

The lack of accurate and easy to understand DVD player repair instructions is a big problem. Thankfully, after a rather persistent online search, I managed to track down a decent and helpful DVD player repairing manual that will greatly benefit beginner as well as intermediate technicians.

You may head over to the link below to find out more about this manual. It teaches you everything from troubleshooting a player’s power supply, to fixing a range of issues including no disc error, excessively high disc spinning, power surge issue, and more.

http://www.howtofixadvdplayerepairguide.info

Also you may want to check out the hints and suggestions below for fixing DVD player problems. Be patient when conducting the troubleshooting process, and make sure you have that isolation transformer armed and ready!

Troubleshooting the player’s power supply and performing voltage testing can be very dangerous so that’s why it’s necessary to have an isolation transformer ready in order to shield yourself from nasty, freaky electrical shock.

ESR Shortcut

You know what; I noticed that many inexperienced technicians tend to take the laborious method when it comes to replacing power supply capacitors that have been damaged due to high ESR. You see, they realized that the power supply isn’t working anymore because one of the capacitors in the secondary portion has excessive ESR.

So instead of using a meter to pinpoint the affected capacitor thus isolating the problem in an efficient manner, they went ahead and change all the capacitors on secondary portion of the power supply. This method works yes, but it is way too time consuming!

Imagine if you have let’s say, ten DVD players with malfunctioning power supplies and each one is caused by excessive ESR capacitors. What are you going to do? Change up all the capacitors of every single power supply? Remember, you have ten units to work on. That hugely time consuming right?

The best possible solution is to take a shortcut by isolating the source of failure. In order to do so, you must have access to a good ESR meter. A decent quality one like AnatekCorp blue ESR meter is helpful for detecting high ESR capacitors with absolutely no visible damage. Once the meter has identified the spoiled capacitor, you can change it immediately without having to replace all the capacitors on the secondary side.

Loader Reference

Troubleshooting a DVD player’s loader can be pretty tricky that is if you don’t have a working loader for comparison purposes. Always have a working loader reference ready when you’re troubleshooting on this particularly high failure rate component. It’ll help a lot, plus you can even swap components between the working loader and the defective one, and see if it makes any difference.

Need extensive step-by-step DVD player repair instructions? Why don’t you check out the DVD player repairing manual below. It’ll guide you on the right path to become a top notch DVD player repairer. Follow the link provided below for details

http://howtofixadvdplayerepairguide.info