sell HF 13.56MHz rfid r/w module JMY603 with RS232C interface

TONGZHOU, China - Oct. 22, 2013 - PRLog -- This is Mr. Harry Yang from Jinmuyu Electronics Co., Ltd. if you want to know of the details about the following 13.56MHz rfid reader or rfid module, please contact me.
JMY603 series are RFID reader/writer module with UART serial ports. JMY603 has various functions and supports multi ISO/IEC standard of contactless IC card; the cards from different suppliers. The designer combined some frequent used command of RF IC card and then user could operate the cards with full function by sending simple command to the module. The module and antenna are integrated design. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability.

Qualifications:
Authenticated: BCTC(the Bank Card Test Center )--contactless Bank Card LEVEL 1
PCD: NXP RC500, RC531, RC632
Working frequency: 13.56MHz
RF standard: ISO14443A, ISO14443B, ISO15693
Operating distance: 80mm (Mifare One, typical distance)
Anti collision ability: Full function anti collision; be able to process multi-cards simultaneously; be able to set operate single card only
Auto detecting card: Supported, default OFF
EEPROM: 512 Bytes
Interface: RS232C
Baud rate: 19200--115200 BPS
Power supply: DC5V
Power consumption: 80mA
Dimension: 85mm×60mm×10mm
Weight: about 25g
Operating temperature: -77 ~ +185°F
Storage temperature: -104 ~ +257°F