New Amsoil 2 stroke Injection Oil (AIO) Snowmobiles, 2 cycle outboard motorsNew Amsoil 2 stroke Injector oil product code AIO for Snowmobiles, Snow machines & 2 cycle outboard motors. Redesign for those people who want the best synthetic snowmobile and outboard engine oil to use as an injection oil or a 50:1 pre mix.
Amsoil- AMSOIL Injection Oil is clean burning. It is stocked with detergent and performance additives that neutralize damaging deposits that can cause ring sticking, ring scoring and power valve exhaust clogging. AMSOIL Injection Oil is ideal for injection outboard motors, snowmobiles and personal watercraft or as a 50:1 mix. click here to Visit the website or to place an order http://www.the- click here to get our Wholesale price list http://www.amssyntheticoil.com/ Package sizes include: Quart Bottle 1-Gallon Bottle 16-Gallon Keg 30-Gallon Drum 55-Gallon Drum 275-Gallon Tote APPLICATIONS AMSOIL 2-Stroke Injection Oil is ideal for use in all 2 cycle outboard motor and snowmobiles and where API TC and NMMA TC-W3 oils are needed. It meets the requirements for warranty protection protection by BRP®/Evinrude®/ Strenuous conditions define the normal operating environments of snowmobiles and boats. Without the right lubrication, two-stroke snowmobile engines and outboard motors run hotter, accumulate deposits and suffer a reduction in performance. AMSOIL Synthetic 2-Stroke Injector Oil offers the convenience of one formula for the tough conditions of all two-stroke recreational equipment requiring NMMA TC-W3 and API TC two-stroke oil. It’s tested and proven to minimize wear and deposits that can damage internal components. AMSOIL Synthetic 2-Stroke Injector Oil provides quality and affordability for cost-conscious enthusiasts who want the benefits of synthetic two-stroke oil. Wear Protection AMSOIL Synthetic 2-Stroke Injector Oil reduces wear and maximizes engine life. Its high lubricity and reliable film strength help protect against piston scuffing and bearing wear. Engine Cleanliness AMSOIL Injector Oil is clean burning. It is fortified with high-temperature detergent and dispersant additives and naturally resists harmful deposits that cause ring-sticking, ring-jacking and exhaust power valve sticking. AMSOIL Injector Oil is ideal for direct-injection outboard motors, snowmobiles and personal watercraft (PWC). Cold-Temperature Performance AMSOIL Injector Oil provides cold-temperature fluidity with a pour point lower than -60°F. Rapid oil flow on cold starts ensures oil reaches vital components quickly and helps prevent damaging, dry starts. NMMA TC-W3 API TC Ideal for outboard motors and snowmobiles Protects against rust and wear Controls deposits <-60°F pour point Use as injection oil or 50:1 pre-mix (2.6 oz. per U.S. gallon of gas). For Evinrude factory lean setting, use AMSOIL HP Marine Synthetic 2-Stroke Oil. COMPATIBILITY AMSOIL Synthetic 2-Stroke Injector Oil is compatible with most conventional and synthetic two-stroke oils; however, for best performance, mixing oils should be minimized. HEALTH AND SAFETY This product is not expected to cause health concerns when used for the intended applications and according to the recommendations in the Safety Data Sheet (SDS). An SDS is available via the Internet or upon request at (715) 392-7101. Keep Out of Reach of Children. Recycle used oil and bottle. WARRANTY AMSOIL Synthetic 2-Stroke Injector Oil is Warranty Secure™, keeping your factory warranty intact. AMSOIL Injector Oil is a high-performance replacement for vehicle manufacturer- TYPICAL TECHNICAL PROPERTIES AMSOIL Synthetic 2-Stroke Injector Oil Kinematic Viscosity @ 100°C, cSt (ASTM D445) 6.9 Kinematic Viscosity @ 40°C, cSt (ASTM D445) 35.3 Viscosity Index (ASTM D2270) 161 Pour Point °C (°F) (ASTM D97) -51 (-60) Flash Point °C (°F) (ASTM D92) 88 (191) Fire Point °C (°F) (ASTM D92) 88 (191) SAE J1536 Fluidity/Miscibility Grade 4 Arctic Climate (17,000 cP max @ -40°C) Pass Photo: https://www.prlog.org/ End
|
Account Phone Number