Senko introduces MPO PLUS Connector with Flex Angle Boot

MARLBORO, Mass. - Nov. 12, 2013 - PRLog -- Senko’s MPO Connector with Flex Angle boot is solving the congestion problems that naturally occur when hundreds of fibers terminate at one small patch panel.
The MPO Flex-Angle boot is designed to bend and maintain any angle or direction from straight to 90°. The Flex Angle boot is molded over a single stainless steel wire and can be easily positioned by hand. The internal wire holds the boot at the desired angle or direction. The MPO Flex Angle boot is designed to perfectly dress the fibers. Senko’s Flex Angle boot controls the force and bend radius with little to no increase in insertion loss. For more info: http://www.senko.com/mpoplus

NEW MPO PLUS FEATURES

• Lower Insertion loss on SM Typical 0.1dB
• Lower Insertion loss on MM Typical 0.08dB
• Meets and exceeds Telcordia GR-1435
• Removable Housing
• Metal Pin Holder
• Oval Spring
• 20N Spring for 24F MM Ferrule
• Spring Push with Slit for easier assembly
• MPO-HD for High Density Application
• Flex angle boot and other boot styles
• IP-MPO Outdoor rated IP-68 housing