RX62N (Renesan) Application Board from CoiNel

BENGALURU, India - May 21, 2014 - PRLog -- RX62N Board Features:

MCU: RX62N (R5F562N8BDFB)

Onboard USB Host Connector: USB type A.
Onboard USB device: USB Mini.
Onboard Micro: SD Card Interface.
 ETHERNET Connectivity Option.
 Onboard RESET Switch.
 Onboard 14 pin JTAG connector for Debugging/Programming Application.
 Onboard Boot selection switch.
 Onboard Power, Reset and Test LED.
 Onboard test switch and Buzzer.
 UART TTL pin out x 2.
 GPIO pin outs.
 Onboard RTC with 32.768 KHz crystal.
 Onboard 12MHz crystal for main clock.
 Onboard 256Kb EEPROM.
 Onboard 16MBits Serial Flash.
 Onboard SDRAM of 128MBits.
 Onboard TFT driver chip along with SDRAM of 128Mbits (optional).
 Onboard LVDS transmitter for driving 10.4” TFT (optional).

The TFT driver chip Supports resolutions up to 960x540 or 800x600 (optional)

LCD direct drive via MCU: Supports upto 800 x 480 resolution.
Onboard resistor settings to choose TFT drive via TFT driver or MCU Direct LCD.

Supported TFT: 3.2”, 3.5”, 4.3”, 5.7”, 7” and 10.4”

Onboard Power supply Circuit for +3.3V and 2.5V.

Power Supply-DC Input 5V/1A.

Board Specifications.

No of layers: 4
Solder Mask: Red
Board Dimensions: 110 x 60 mm
Finish: ENIG

For More detail on this product kindly visit: www.coineltech.com

The display connectivity option is available for the following display units.

3.2inch TFT with touch Connectivity
Model: KWH032GM02-F05
Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
Number of Pixels: 320 x 240
Note: SPI interface can also be used. Driver IC: ILI9341. (Connection has to be taken through single wires and connected to RX62N Board)

Demo on this board as follows:

10.4'' TFT with Touch Demo on CIE RX62N Application Board
https://www.youtube.com/watch?v=rEfDvUHLavY&feature=p...



You can buy the TFT displays from the following link

3.2inch TFT with Touchscreen
3.5inch TFT with touch Connectivity
Model: TM035KBH02
Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
Number of Pixels: 320 x 240
Note: SPI interface can also be used. Driver IC: Novatek NT39016D. (Connection has to be taken through single wires and connected to RX62N Board)

Tested through: Internal TFT Driver.

You can buy the TFT displays from the following link

3.5 inch TFT with Touchscreen.
4.3 inch TFT with touch Connectivity
Model: TM043NBH02
Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
Number of Pixels: 480 x 272
Tested through: Internal TFT Driver.

You can buy the TFT displays from the following link

4.3inch TFT with Touchscreen(SPI)

Note: The above board supports interface of touchscreen with SPI only.

The link given below if for the board that interfaces touchscreen with SPI and Analog.

4.3inch TFT with Touchscreen( SPI/Analog)

5.7 inch TFT with touch Connectivity

Model: TM057NBH02
Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
Number of Pixels: 320 x 240

Tested through: Internal TFT Driver.
Note: This TFT is currently not available.

7 inch TFT with touch Connectivity

Model: KWH070KQ13-F02
Interface : Parallel (connected to RX62N Board via 40 PIN flat Cable).
Number of Pixels: 800 x 480

Tested through: Internal and External TFT Driver.

You can buy the TFT displays from the following link
 7 inch TFT with Touchscreen.
10.4 inch TFT with touch Connectivity

Model: TM104SBH01
Interface : Parallel (connected to RX62N Board by direct connector on TFT).
Number of Pixels: 800 X 600

Tested through: On Board External TFT Driver.

You can buy the TFT displays from the following link
 10.4 inch TFT with Touchscreen.
Note:

There are certain resistor settings on the hardware that needs to be changed to make the board compatible for the TFT that would be used. We provide the settings done as per ordered TFT. For any other TFT used beyond one initially ordered you would need to resolder the resistors accordingly. The resistor setting/resoldering can be done for internal and external TFT driving capability as required.

You can choose various combinations required as per your need and send the details to info@coineltech.com to get quote.

RX62N Group Specifications:

CPU CORE: RX CPU
General registers: 32-bit x 16
Multiplier: 32-bit multiplier
Divider: Yes
Multiply-accumulator: Yes (two types: memory-to-memory operations and register-to-register operations)
Memory-protection unit (MPU)
Maximum Freq: 100 MHzPower Supply Voltage: 2.7 to 3.6V
Floating Point Processing Unit: Single-precision floating-point processing unit.
(Supports add/subtract/compare/multiply/divide and other instructions)
Flash ROM (for program storage): 512KB
Flash ROM (for data storage): 32KB
RAM: Max. 96KB
On Chip Peripheral Functions
Direct memory access controller (DMAC) x 4 channels
Data transfer controller (DTC)
Direct memory access controller designed exclusively (EXDMAC)
x 2 channels (Over 144-pin PKG Only)
16-bit multifunction timer pulse unit (MTU2) x 12 channels
Port output enable
16-bit compare match timer x 4 channels
8-bit timer (TMR) x 4 channels
4-bit Programmable pulse generator (PPG) x 2 channels (max)
14-bit Independent watchdog timer (IWDT)
8-bit Watchdog timer (WDT)
Realtime clock (RTC)
Serial communication interface (SCI) x 6 channels
I²C bus interface:Except 100-pin [2 channels], 100-pin [1channel]
Serial peripheral interface (RSPI) x 2 channels
SDRAM interface (max. 32-bit width;Over 144-pin PKG Only)
A/D converter (10-bit) x 8 channels [4 channels x 2 units] or (12-bit) x 8 channels [8 channels x 1 unit] (12-bit and 10-bit can not use at the same time.)
D/A converter (10-bit): Except 100-pin [2 channels], 100-pin [1channel]
USB2.0FullSpeed: 176-pin [2 channels, H/F/OTG], Except 176-pin [1channel, H/F/OTG]
CAN x 1 channel
EtherC with dedicated DMAC x 1 channel
CRC calculator
Low-speed on-chip oscillator (OCO)
Power-on reset circuit (POR)
Voltage detection circuit (LVD)
On Chip Debugging: Yes (with trace function)
Low Power Consumption Mode:4 modes

PRODUCT ORDERING CODE: RX62N-DEV