Decanter centrifuge for drilling waste management

CANGZHOU, China - July 3, 2014 - PRLog -- In drilling waste management ,the main function of a decanter centrifuge is to separate the ultra fine solids ,say less than 5 microns.

There are some principles to selelct the best suitable drilling waste management centrifuge.

1.Centrifuge bowl and screw conveyor or aunger steel material .Normally SS316 is enough for oil based mud.

2.Based on the local natural environment ,high temperature explosion proof control panle should be used .In some Middle east countries such as Kuwait and Saudi Arabia ,the temperature can be as high as 55℃，it is a great challenge for the VFD control panel frequency convertor.Vertex tube air cooler is a good solution.

3.Centrifuge feeding and discharge system ,Optimized fluids inlet system minimized the breakage for the material during feeding, result in more effective treatment,The inside structure adjustment satisfy the high percentage solids contain in drilling waste retreatment and big volume solids discharge requirement .Our high pulling torque and power features design can meet different worksite needs.


http://www.fdpetrol.com/drilling-waste-management/dewater...

A cost effective method to dispose of drilling waste, based on the specific understanding of the subsurface geology, accurate planning and project specific solutions.

—Reduces need to dump and dilute

◦REMOVING 1 BBL SOLIDS AS MUD CONTAINING 5% by VOL

SOLIDS = 19 BBLS LIQUID LOST
◦
◦REMOVING 1 BBL SOLIDS AS S.C. EQUIP DISCARD @ 50% BY

VOL SOLIDS = 1 BBL LIQUID LOST
—Reduces the volume of waste produced
—Can be enhanced through cuttings drying (OBM) and de-watering (WBM)
—Dramatically reduces the cost of Waste Management and Transportation

FD Petrol drilling waste management decanter centrifuge range from 14 inch to 18 inch ,high speed can reach 3200RPM,bowl and screw conveyor made from 316 L stainless steeel for abrasive protection .

Decanter centrifuge control panel are IEC or Atex certified ,configrued with ABB frequency convertor and Schneider electric main components.

The DW 2000 decanter centrifuge is specially designed for high solids content ,heavy gravity mud .The inside structure adjustment satisfy the high percentage solids contain in drilling waste retreatment and big volume solids discharge requirement .Optimized fluids inlet system minimized the breakage for the material during feeding, result in more effective treatment .Special main body structure design highly decreases the liquid phase percentage in discharged solids and solids phase percentage in recycled fluids.

FD Petrol provide total solutons for OBM and WBM drilling waste treatment ,by SGL cuttings dryer system and dewatering system.

http://www.fdpetrol.com/drilling-waste-management/vertica...

The two systems have been proved in domestic and overseas market ,help end customer save fluids cost and minimize the effect of drilling waste on enviorement.

For more about our drilling waste management systems,pls contact us in China or Dubai.