UV LED Spot Equipment - Improve your process time and increase efficiency

ALCESTER, U.K. - Oct. 20, 2014 - PRLog -- The LED Spot has been developed for all applications requiring an intensive UV irradiation over a larger area. Thanks to its high intensity and the possibility to program complete process sequences (for example exposure series with different intensities and holding times) the shortest possible cycle and machine throughput times can be realised, especially in fully automated production lines.

The square light emitting aperture is 20 mm x 20 mm, however depending on the required intensity and homogeneity this can be increased considerably by altering the distance between the device to the substrate. The resulting irradiation field can then be divided into four segments, which can be activated and programmed independently from each other. The LED Spot registers both the LED operating hours, as well as the units operating hours.

As this device utilises LED’s, it naturally has a very long service life, the typical life span of an LED is longer than 20,000 hours. The LED’s can be switched on and off as often as necessary, without any time wastage, they do not require a heating time or a cooling phase. The integrated fan provides more than adequate cooling, even for continuous operation.

The LED Spot W provides a very intensive UV irradiation over a large area, whilst only requiring a very small amount of space. Thanks to the external water cooling system, this miniature device offers a high intensity and can be used within a clean room environment, as it does not require an integrated fan.

The LED Spot 100 has been developed for all applications requiring a highly intensive irradiance over a large area. The LED assembly, as well as an electric power control, guarantee both a high intensity and homogenous distribution of light. The device provides a high process stability, producing repeatable results and works especially well in fully automated product lines where the shorted cycle times and be realised and executed.