ZTE MF93E 4G LTE Mobile Hotspot Review

Jan. 5, 2015 - PRLog -- Following Huawei E5776, the candidates ZTE has a new 4G mobile hotspot now with LTE support and colorful screen on offer - ZTE MF93E (http://www.4gltemall.com/zte-mf93e-4g-fdd-td-lte-mobile-wifi-router.html). We have all the key data summarized for you and show you where advantages and disadvantages are similar to Huawei models and whether the purchase worthwhile.



 LTE features and characteristics of ZTE MF93E

 Manufacturer and model number   ZTE MF93E

 Download rate   up to 100 MBit/s

 Upload rate   up to 50 MBit/s

 Supported LTE bands   LTE 1.8, 2.6 GHz (FDD) & 2.3, 2.6 GHz (TDD)

 Backward compatible with:   DC-HSPA+ / HSPA+ / UMTS / EDGE / GSM / GPRS

 Support LTE-Advanced   no

 MIMO Support:   MIMO 2x2

 Connector for external antenna   yes; 2 antenna sockets, type TS-9 available (buy ZTE MF93E antenna)

 LTE Category:   LTE Modem to Category 3 (CAT3)

 Chipset   Qualcomm MDM9215

 Others

 Dimensions (LxWxH)   107 mm x 61 mm x 16 mm and 105 Gramm

 USB-Standard   USB 2.0

 Memory card expansion   yes; With 32 GB MicroSD

 Battery capacity   2800 mAh,  10 hours

 Compatible Operating Systems   Windows XP, Windows Vista, Windows 7+8, Mac OS (above 10.4)

 Release   March 2014

 Availability   on www.4gltemall.com

 Handbuch PDF   unfortunately not yet available online

ZTE MF93E is a so-called "mobile hotspot" router. This type of device looks like space-saving mobile phone in pocket size, but they would provide just wireless network with router function. So users can go outside not just with one terminal, actually , in this case, up to 10 wireless devices could be taken if there is ZTE MF93E in hand.



Technical data

The ZTE MF93E supports LTE category 3 at 1800 & 2600 MHz (FDD mode), and 2300 & 2600 in the TDD modulation mode. The latter, however, is largely prevalent in Asia. The LTE band 800 MHz is not covered, which means some insignificant shortcoming in certain area and countries. LTE Category 3 allowed data rates of up to 100 Mbps for downstream and 50 Mbps for upstream. In addition, however, the router can also access major 3G and 2G standards to the Internet, such as UMTS, HSPA+, EDGE or GSM.



The WLAN module is working on 802.11b/g/n, so that internal networking data rates of up to 150 Mbps can be achieved. This is not necessarily "often state the art", but at least functional. After all, this is not self-evident; the operation in the dual band of 2.4 GHz and 5 GHz is possible. In addition, there are two TS-9 ports located on the bottom for connecting an external antenna to the receiving optimization. ZTE MF93E has a battery of quite handsome capacity of 2800 mAh, which should be sufficient for 9-10 hours operating time. Of course, the user can also operate on AC power, provided a power source is present.

Display

On the front, ZTE MF93E has built a color information display. This is partly for control and also displays any relevant connection status, such as the radio standard used or surfing data volume during the online session.



There is no doubt that ZTE MF93E is a very visually attractive device. Since the release time is too long ago in the first quarter of 2014, there are no technically new similar models for competition. The MF93E is most likely comparable with Huawei E589, which has similar specifications, but not all.



In conclusion, ZTE MF93E satisfies the LTE category 3, and supports the maximum speed to 100Mbps, which is good enough for normal use under good network condition. Also the battery is good enough with 3000 mAh capacity. But if you want LTE category 4 mobile WiFi, the best alternative would be the Huawei E5372 (http://www.4gltemall.com/huawei-e5372-lte-cat4-mobile-wif...), which is already offering LTE Category 4 and connection speed reach up to 150mbps. Whether you think ZTE MF93E is suitable for you or not, you must make your own decision if you a real good 4G pocket MiFi.