4 Cavity Spray Applicator Mold

TAIPEI, Taiwan - May 17, 2021 - PRLog -- For the safe transporation consideration, when we did the mold packing, the hydralic cylinder and housing had been disassemblied firstly.  When this mold arrives your end, install them on (there is an installation direction, just locking it!)

Our hydraulic cylinder is a rather precisive-sensing type.

cylinder body is made by stainless steel..and attach with sensing switch.  Its function is the same as a regular limited switch.  You may set its movement function as your need.

For making sure the mold operational safety, the safety switch is set for ejection plate returnning.  So, when the mold does not return back the proper position, the mold can not be closed… that the mold is protected.

This is a high class water proof switch, even it is splashed by water, it can still be used.

The marking of IN-OUT in on each water channel inlet.

Install them, it is done !

The hydraulic cylinder connector is attched on cylinder.

Our parts unscrewing mold design is to push the cylinder out (this movement is mentioned on the cylinder's housing).  Connect the right direction of the cylinder, it is done!

The parts unscrewing ejection movement, per illustrated here !

https://www.taiwanmoldmaker.com/