Maintainance of small rice mill production line

LUANDA, Angola - March 28, 2022 - PRLog -- The combined rice milling machine is consists of elevators, paddy destoner cleaner, rice huller, paddy rice separator, rice whitener, broken rice screen. which are connected by elevators, working automatically. It can labor and energy, increase working efficiency greatly.

Something needs to be noted during using:
1) Paddy destoner cleaner is used to remove the stone and impurities from raw paddy. But some clients will meet the problem of stone outlet will discharge the paddy. This is because the air door on the pipe does not adjust well. Or the draught fan motor is connected in reverse. After adjusting well, the machine will work well.
2) rice huller is the machine to remove the husk from paddy, get brown rice. Its hulling rate can reach 85-90%, if, with the high broken rate or low hulling rate, The rubber roller is either too tight or too loose, need to adjust the rubber rollers' space correspondingly.
3) Paddy rice separator, its working will affect following machines working. So it is a key part of rice processing plants. The separator screen must be full. It has 2 outlets. The upper one and below one. The upper one should be closed until the screen is full of paddy, then open (brown rice to whitener machine). The below outlet is open all the way (raw paddy to rice huller again)
4) rice whitener is to make brown rice into white. To reduce the broken rate and milling time, firstly the machine should be closed. Until it is full with around 2/3 brown rice, then open the machine. Also can adjust pressure mold to control the broken rate and whitening degree.
5) Elevator, we need to notice the first one, feeding the paddy at a uniform speed to avoid its block.
We must be to observe every step of rice mill production line  carefully to ensure that each step is skillfully operated to achieve continuous operation of the whole rice mill production line https://www.shellermachine.com/rice-mill-production-line