Wood Pelletizing Process Flow Chart

RED SEA, Egypt - Jan. 6, 2023 - PRLog -- This wood production line is designed and built for making bio-fuel pellets from palm fiber.
First, raw fiber is to be shredded in a palm oil factory, and they will be put in a grinding machine to produce optimal size or length of the material.
Next, the grinded fiber will have to be dried out so that the moisture content will be kept at a minimum, and this is important because pellets should be consistently dry throughout its full usage.
Then, this dry fiber would be transported to a wood pellet machine https://www.zenopelletmachine.com/product/wood-pellet-machine/ to transform them into pellets, which would end up as hard, coarse and hot once they would come out. After which, these pellets would be cooled down to the required temperature and will be further sent to the next process to be able to pack it nice and good for importation and sales

Types Of Palm Pellets
Oil palm use for biomass fuel pellet production line has been very prevalent during these past few years. Through the help of the trees' large leaves, trunks and fronds, a large amount of biomass product had been acquired, and these have been used for both domestic and industrial biomass cooking boilers and power plants. However, confusions tend to arise from all the palm pellet types, so below, we shall expound on these and even tackle the seemingly complicated process of pelleting.

EFB Pellets: These pellets are acquired from the extraction of crude palm oil from an empty fruit bunch (EFB). They are denser and are easier to store, with the added benefit of them costing less than the regular pellet type.
Mesocarp Pellets: Mesocarp Pellets are usually extracted from the innards of the palm tree, as it basically is the fiber from the oil palm fruit.
Trunk Pellets :A result of actual palm trees that have been taken down for other uses, these types of pellets can serve as a natural cooking fuel.