Flare Ignition Device for Heat Transfer

April 28, 2011 - PRLog -- Flare ignition device is working to burn the waste gas in oil and gas feild or chechmical industry . In the oil and gas feild, the flare ignition device always working together with the mud gas separator to light the gas separated from the mud gas separator.
Please check here for Flare ignition device:http://www.gnsolidscontrol.com/electric-ignition-device/
Here we 'd like to introduce you the working procedure for flare ignition device.
1.Have the flammable gas conveyed to the air intake of gas burner (torch) through the pipeline installed at the safe area.
2. Connect and start current transformation of flare ignition device and electric circuit of voltage amplification.
3. Open the liquefied gas pot and ignite fire-leading tube through operating electronic igniter (ignition at first stage), or with the fire-leading gas valve of emptying gas directly opened, ignite fire-leading tube through electronic igniter (ignition at first stage).  
4. Open gas blown down valve and ignite the blown down gas through the flaming fire-leading tube (ignition at second stage).
5. Have the liquefied gas pot closed with fire-leading tube put out, letting the blown down flammable gas to freely burning.
Please click here for more information regarding for mud gas separator: http://www.gn-desander-desilter.com/mud-gas-separator-ven...
The mud gas separator working before the flares , clients normally order falre ignition device together with mud gas separator if they are working in oil and gas   area . Also for heat transfer , clients will choose them too but may be a litte different of treatment

# # #

Solids Control Equipments & System China Manufacturer,Supply fluids Processing system, Shale Shaker, Mud cleaner, Centrifuge,Vacuum degasser,Sand pump,Gas-liquid Separator,desander,desilter,mud tanks,mud hoppers,for oilfield oil&gas well drilling rig.