GN Vertical Cutting dryer for drilling waste management

Oct. 27, 2012 - PRLog -- Vertical cutting dryer is widely used for drilling waste management. During  the process of drilling .The drill bit grinds rocks into drill cuttings. these cuttings become entrained in the mud flow and are carried to the surface. The first step in separating the cuttings from the mud is use shale shakers. The liquid mud passes through the screens and is recirculated back to the mud tanks. But the separated drill cuttings by shale shaker still are coated with a large quantity of drilling mud .if the drilling mud is oil based mud or synthetic base mud. Vertical cutting dryer is a very effective device to process the drill cuttings that separated out from shale shaker.
http://www.gnsolidscontrol.com/drilling-waste-management/

GN vertical cuttings dryer incorporates a high speed centrifuge can make a excellent liquid/solids separation in large-volume processing. It can reduce the drill solids waste discharge dramatically and make a maximum recovery of non-aqueous drilling fluids.
http://www.gnsolidscontrol.com/decanting-centrifuge/

Specification of GNCD930 Vertical Cutting Dryer

Model :                             GNCD930
Feed Capacity :              30-50 Tons/h
Max Bowl Diameter:      930mm
Screen Opening:            250/350/500 Microns
Rotary Speed (max):     890rpm
G Force (max) :              400  
Main Motor :                    45Kw
Oil Pump Motor :            0.75Kw
Dimension :                    2780×2080×2450mm
Weight:                             4500Kg
Voltage:                            380V/50Hz or 460V/60Hz or customized
Dryness Efficiency:            5%
Motor & Electrical             Explosion Poof ( Exd II Bt 4 )

For more information of GNCD930 Vertical Cutting Dryer,Please contact with GN Solids Control freely