Dreambox 800 HD multimedia receiver added to the DC power switch

Oct. 14, 2010 - PRLog -- Dreambox 800 HD( http://www.dreambox-500s.co.uk  ) and Dreambox 500S( http://www.dreambox-500s.co.uk/Dreambox-DM500S.aspx ) multimedia receiver as a remote control off, the machine power is still large. As a result of an external power adapter, the machine power switch on the back panel is not set, for convenience, you can add a DC power switch whom. This not only can easily shut down the machine crashes can, through the switch recovery. Save the trouble of plugging the power cord.
Dreambox 800 HD( http://www.dreambox-500s.co.uk/Dreambox-800-HD.aspx ) lot of back panel interfaces, layout is very compact and difficult to add a switch, taking into account the number of buildings in most parts of the domestic cable operators, the user uses a special digital cable set-top box provided, so one inside the RJ 11 interface telephone modem board (referred to as "phone a small plate" of little use. In fact, some DM800 HD board is not installed on the machine call the small components can remove it and use the empty slot after the panel location to install a DC power switch, 12V DC power supply used to control the turn-off.
Add specific methods are as follows:
(1) from the electronic market to buy a small 250V 3A, single-pole rocker switch, which can be installed just a lie given to the RJ 11 connector slot left empty position.
(2) in the computer motherboard close to the 12V power input socket on the back, cut off a PCB traces, solder and thread on the two plastic pins from the SCART socket of the fixing holes (to be hot through the first electric iron) wear clothing.
(3) the two ends welded to the other thread on the switch, then switch into the empty slot position, you can control the machine through 12V DC power supply is broken.

# # #

Free shipping!Offer DreamBox 500C,DreamBox 500s,DreamBox 7020,DreamBox 600,Dreambox 800,Dreambox 800 HD,Dreambox 800S,Dreambox 800C,BlackBox 500S,BlackBox 500C direct from manufacturer.