How Electric flare ignition device work

Oct. 16, 2010 - PRLog -- How Electric flare ignition device work to protect the safety of drilling?

1.Have the flammable gas conveyed to the air intake of gas burner (torch) through the pipeline installed at the safe area.
2. Connect and start current transformation of flare ignition device and electric circuit of voltage amplification.
3. Open the liquefied gas pot and ignite fire-leading tube through operating electronic igniter (ignition at first stage), or with the fire-leading gas valve of emptying gas directly opened, ignite fire-leading tube through electronic igniter (ignition at first stage).  

http://www.freepatentsonline.com/4450499.html

4. Open gas blown down valve and ignite the blown down gas through the flaming fire-leading tube (ignition at second stage).
5. Have the liquefied gas pot closed with fire-leading tube put out, letting the blown down flammable gas to freely burning.

The electric flare ignition device for oil well flaring of combustible gases which includes a central control unit, low voltage interconnect line and plural remote igniter units which include alternate first and second spark gaps coordinated in fail-safe operation.

GN flare ignition device is inclined to improved to an electronic automatic ignition device of low cost and high reliability which functions to assure continual proper flare ignition of combustible gases from the drilling system mud line flare point.
http://www.gnsolidscontrol.com/gas-liquid-separator/

How to install GN flare ignition device ?
1. Flare ignition (controlling) device model GDH-2 (hereinafter called igniter for short) should be placed at the place rain-proof and blowing sand proof. The igniter is strictly prohibited bottom up.
2. The igniter and ignition arrangement should be connected with the prepared connecting wire and then, have the ignition conductor end of high voltage screwed down and placed on the discharge needle.

http://www.gnsolidscontrol.com/electric-ignition-device/

Flare ignition device is usually used together with mud gas separator, the harmful combustible gas in drilling fluids is separated by the mud gas separator(poor boy degasser), then the harmful gas is transfer to flare ignition device by the vent lines, and be blown down and burned. GN also supply vent lines customized.

# # #

GN-Solids control is a China solids control equipments professional manufacturer.Our solids control equipments can be used in both onshore and offshore oilfield for oil gas well drilling fluids circulation-Drilling mud complete solids control.