GNPS Shaker and VSM 300 shale shaker

Nov. 8, 2010 - PRLog -- GNPS Shale shaker

GNPS vibratory shaker is blanced elliptical type also. This can be considered as latest generation in China. The fourth generation shale shaker. It overcome many shortcoming of former shaker. Such as the drilling mud jam, the screen block, the horseshoe effect, back down, etc. Then the ballanced elliptical shaker hold higher efficiency.
http://www.gn-shale-shaker.com/dual-motion-shale-shaker-vs-balanced-elliptical-shaker/

Balanced elliptical shaker holds 20-30% higher treating capacity than former shakers. GNPS Shale shaker can hold capacity up to 880GPM.The treating capacity also relates with screen quantity. Usually, there will be 3 panels or 4 panels shaker screen on it. Nowadays, more and more clients are interested in GNPS shale shaker. Thanks to our technique support from Southwest Petroleum University also our reliable quality on other oilfield mud equipments.



VSM 300 information

VSM 300 Shale shaker is from NOV-world famous solids control player. This type shale shaker is ballanced elliptical shale shaker. This shaker delivers dramatic increase in capacity through unique vibratory motion and screen deck layouts, the VSM? 300 rewrites the rule book. Thereby, fine screen utilization throughout the well is now a reality!

The use of integral secondary drying technology, demonstrates the National Oilwell Varco? commitment to delivering cost effective, environmentally responsible solutions to the oil industry. The VSM 300 is an extremely simple machine to operate; maintenance is minimal and screen changing is carried out in 2-3 minutes by ONE operator.
http://www.gn-shale-shaker.com/category/gn-shale-shaker/p...

Supplied in modular form, the Brandt? VSM 300 can be assembled on site to produce multiple units thereby reducing installation time and costs. NOV Brandt's proven shallow header tank system provides equal flow distribution across the shakers, even when multiple units are installed. The VSM 300 can be retrofitted on to VSM 100 skids. This significantly reduces installation costs on rigs where VSM 100 shakers are already installed.


Comparison on shakers

GNPS is from new play for mud solids control--GN Solids Control. This shale shaker holds similar shaker screen as Derrick FLC 500 series and FLC200 Series. This provides easier replacement screen.

Different manufacturer has different design and configuration way. Then they'll have their own strength. The VSM 300 is rather popular with clients since its reliable quality and the famous brand-NOV Brandt.
http://www.gn-shale-shaker.com/drilling-mud-solids-remova...

Shale shaker for solids control are devices remove drill cuttings from the drilling fluid while circulating. There are many different designs and research into the best design is constantly ongoing since solids control is vital in keeping down costs associated with the drilling fluids

# # #

GN provides you qualified goods at your budget. including shale shaker, mud cleaner, decanter centrifuge, centrifugal pump, decanter centrifuge, mud agitator, mud jet mixer, mud gas separator, flare ignition device, whole mud purification sytem