EHV Transformer Leak Sealing Kit from Project Sales Corp, India

Nov. 20, 2011 - PRLog -- Project Sales Corp has brought in CarGo QuikSteel to India under a marketing arrangement with Blue Magic USA.

Project Sales Corp now introduces the EHV Transformer Oil Leak Sealing Kit – with QuikSteel From CarGo Chemical USA

Contains:
10 x 113.6 grams Original CarGo USA QuikSteel Epoxy Putty Stick (260 deg temperature resistance)
2 x 400 ml Cleaner Spray for surface cleaning
1 pack of Absorbent Wipes
3 Pair of Gloves
1 Cutting Blade
1 Spatula for material finishing
1/4 Piece of Styptic Pencil Stick for temporary stoppage of leakage to allow putty application
1 Scocth-brite for surface roughening

Packed in an easy to carry tool kit, the price is kept at INR.4800 per kit plus taxes.

About QUIKSTEEL from Project Sales Corp, India


QUIKSTEEL is a steel fortified, high temperature (500°/260°C) epoxy putty that can be used to make quick, permanent repairs of all materials except rubber.* It can be used to repair products and parts made of steel, copper, aluminum, cast iron, stainless steel, galvanized steel, brass, bronze, chrome, silver, gold, exotic metals, glass, plastic, fiberglass, epoxy fiber materials, PVC, concrete, ceramic, brick, tile and porcelain. (*QUIKSTEEL will adhere to rubber, but it will not maintain its bond on rubber products that are constantly flexing).

QUIKSTEEL is certified safe by NSF for use on all drinking water pipes, tanks and systems but can also be used in many areas such as...

    Gas tanks
    Intake manifolds
    Stripped bolt holes
    Mufflers & tail pipes
    Radiators
    Battery Cases
    Mirror mountings
    Engine blocks
    Gaskets
    Plastic grills

QUIKSTEEL is ideal for repairs to materials, parts and products where conventional heat welding cannot be accomplished due to the material, location of break, access, or difficulty of disassembling the product or part. Because it has the consistency of putty and will not run, the repair can be made overhead or in the vertical plane, as well as the horizontal plane…even inside tanks filled with fluids or chemicals.

QUIKSTEEL will setup under water or in fluids. QUIKSTEEL is impervious to chemicals, solvents, oils, and acids including battery acids.

No special tools or training is required to successfully used QUIKSTEEL. After QUIKSTEEL is fully cured (60 minutes), it can be milled, machined, drilled, tapped, shaped, filled, sanded, and painted. You can do anything to QUIKSTEEL that you can do to metal or wood.

QUIKSTEEL is a proprietary resin compound fortified with steel powder.

QUIKSTEEL:
Will not rust or oxide.
Is impervious to chemicals and corrosion.
Fast curing. Sets in 4 o 5 minutes, is hard like steel in 15 minutes, and fully cured in 60 minutes.
Can be formed and shaped
Will adhere to wet surfaces, underwater, and within chemicals. (Cure time is double when making repairs underwater or within chemicals.)
Has a minimum three year shelf life prior to mixing. A QUIKSTEEL repair will last forever after it is fully cured.
Is waste free. The exact amount can be cut or broken off from the master stick for mixing.
Is ideal for making repairs on the road, in remote locations, etc.
Is an ideal emergency repair product for toolbox, car, truck, off-road vehicle, boat, etc.
Can be used as a sealant, adhesive, putty, cement, or to mod, reshape or reform products.

IMPORTANT MIXING INSTRUCTIONS

Mix epoxy putty until it is a consistent gray color free of any black specs (it probably will start to get warm at this point). Once the putty is warm and the color is consistent, you have about 5 minutes to mold, form, seal, cement, and otherwise make repairs using QUIKSTEEL starts to set. Once QUIKSTEEL starts to setup, do not continue to make repairs, as it will not adhere properly.

# # #

Project Sales Corp has three broad lines of business:

1.Rolling Mill Spares - We represents leading manufacturers of bar and rod mill spares who are original equipment spares suppliers to mill builders. We handle Daewha Alloytech range for India markets and introduced the Titanium Carbide Guide Rollers in India in 2004.

2. Turbine Gasketing Products - We import and market turbine sealants - Hylomar, Birkosit, Arexons, etc. used in turbines, compressors, etc. Our customers inclde BHEL, Siemens, Triveni Turbines, MAN Turbo India, Kirloskar Ebara, IPPs like Tata Power, JSW, Lanco, Essar, PSUs NTPC, Nuclear Power, and over 100 power stations across India.

3. Offshore Rig Consumables - We market brands like SPC, Brady, Molykote, Dow Corning, 3M, Kennedy, Gojo, Jetlube, Bestolife, Hilman Rollers, CRC, LPS, Magnaflux, Prinzing, Denso, Uvex, etc making us a one-stop source for the specialty consumables used in oil drilling rigs.

www.facebook.com/ProjectSalesCorp