Omron CX-Thermo Support Software EST2-2C-MV4

May 14, 2012 - PRLog -- Omron CX-Thermo Support Software EST2-2C-MV4 – Complete temperature control and programming.

The CX-Thermo Support Software enables, editing and batch downloading parameters from a personal computer, greatly reducing the work required for setting up parameters and calibrating temperature controllers. The aim of the Omron CX-Thermo Support software is to improve usability and ease of programming, by allowing complete control from one singular source.

CX-Thermo Support Trend Monitoring:

The Omron CX-Thermo easily provides the options for monitoring data from up to 31 Controllers, including PV’s, SP’s, MV’s, PID parameters and alarm ON/OFF status controllers.

To streamline temperature controls and reduce operating errors in calibration, the CX Thermo support software provides the ability to mask/hide unnecessary parameters to display on controllers. (Support only by the ES /N/ N-H/ N-HT and E5 R/ R-T ranges)

The CX Thermo support software also enables logic setting inputs from external inputs (event inputs or temperature status, outputs to external outputs (control or auxiliary outputs) and changing operating status with ON/OFF displays. (Support only by the E5 N /N-H/ N-HT ranges)

Easy adjustment of control performance by fine-tuning via the CX Thermo software.

*1.EJ1N: Up to 64 Controllers, EJ1G: Up to 17 Controllers, E5ZN: Up to 16 Controllers.
*2.Fine-tuning instructs the CX-Thermo to calculate a PID parameters by directly inputting commands to improve response.

http://www.more-control.com/automation-solution/software....

Batch Temperature Controller Programming

One of the main advantages of the CX Thermo support software is the ability to setup batch settings for temperature controllers.

Save time, effort and energy by making batch temperature controller setting on a computer for multiple temperature controllers.

Making batch settings reduces the time for setting control parameters, fine tuning equipment and performance maintenance.

Omron Compatible Temperature Controller devices

   Temperature controllers
       E5GN
       E5CN
       E5EN, E5AN
       E5CN-H, E5EN-H, E5AN-H
       E5CN-HT, E5EN-HT, E5AN-HT
       E5ER, E5AR
       E5ER-T, E5AR-T
       E5ZN
       EJ1N-TC4, EJ1N-TC2, EJ1N-HFU
       EJ1G-TC4, EJ1G-TC2, EJ1G-HFU
       G3ZA (only when connected to EJ1N-TC4, EJ1N-TC2, EJ1G-TC4, EJ1G-TC2)
       G3PW (only when connected to EJ1N-TC4, EJ1N-TC2)
       Note: Models with DeviceNet communications are not supported

Personal computer system requirements

   OS
       OS: Microsoft Windows XP (Service Pack 3 or higher), Vista, or 7
       CPU: A processor recommended by Microsoft
       Memory: A memory recommended by Microsoft
   CPU
       300 MHz min.
   Memory
       128 MB min.
   Harddisk
       300 MB min. available space
   CD-ROM
       One CD-ROM drive min.
   Monitor
       XGA (1024 x 768), High Colour 16 bit min.
   Communications ports
       RS-232C port, or USB port, 1 port min.

Connection method

   An E58-CIFQ1 USB-Serial Conversion Cable is required to connect a computer to the setup tool port of the E5_N, E5_N-H, E5_N-HT, or EJ1
   A K3SC Interface Converter is used to connect a computer to models with RS-422/RS-485 communications
   An E58-CIFIR USB-Infrared Conversion Cable is required to wirelessly connect a computer to models with infrared communications (E5EN-H/EN-HT or E5AN-H/AN-HT)

If you would like to know more about the Omron EST2-2C-MV4 CX Thermo Support Software, call or email More Control today on 0345 00 00 400.