DIY Dslr Rig - Lanparte Tripod Rig for HD Video Cameras such as DSLR CANON NIKON SONY

June 6, 2012 - PRLog -- Lanparte Tripod Rig used on a Tripod. Please Click the following link to watch the introduction video.
http://vimeo.com/40698511

Components inclued in Lanparte Tripod Rig:

Lanparte Matte Box: 1 pcs

Best Value CoolMatte Pro, designed for DSLR such as CANON 7D, 5D, T2I & other cameras. The CoolMatte Pro is truly top of its class.

Video Introduction at vimeo.com/coollcd/coolmatte-pro-dslr-matte-box-for-canon-5d-7d

Lanparte Follow Focus: 1 pcs

Quick Release Opening Rod Clamp: Opening Rod Clamp design make you can quickly & easily clamp it onto 15mm rod.

Compatible with most DSLR Cameras Canon EOS 5D Mark II, EOS 500D, EOS 7D; Nikon D90, D300S, etc..

Completely gear-driven design for slip-free, accurate, and repeatable focus movement

1:1 gear ratio allowing smooth movements for still and motion picture 35mm lenses

Adjustable slide-mounting mechanism to fit large range of lens diameters, including video camera lenses.
Interchangeable drive gears including 0.8 film pitch and fujinon pitch (for fujinon video lenses)


Easily switchable to either side of camera, you can easily change the gear from one side to another.

3D marking disk allow focus marks to be easily viewed by operator or assistant

Standard arri-style accessory port in focus wheel for attaching whip, speed crank, etc.

Industry-standard 15mm lightweight (60mm spacing) rod mounted

Machined with high quality, machined aircraft-grade aluminum

Lightweight design

Compatible with STANDARD 15mm rods.
ONLY 0.52KG Net weight of the CoolFocus Follow Focus body. The reason why the shipping weight 1.2KG is due to its package size, couriers such as DHL charge shipping cost based on its "Size Weight". ("Size Weight"= Length * Width * Height / 5000).

Lanparte Top Handle w/ 2pcs 20cm rods: 1 pack

This Top Handle can be used on virtually any rig, especially DSLR Cage Rig such as our C-shape DSLR Cage.

It also works as a low mode handle for holding dslr cage rigs closer to the ground.


Also includes 2pcs 20cm standard 15mm rods. The 2pcs rods are 60mm apart after installed.

This top handle usually works with DSLR C-shape Cage.

Lanparte Baseplate Pro: 1 pcs

Professional Camera Base plate for HD video cameras, camcorders & dslr cameras such as CANON 5D 7D.

Video introduction at http://vimeo.com/coollcd/baseplate-pro-dslr-camera-base-p...



Compatible with standard 15mm rods. You can mount your Follow Focus and Mattebox and virtually anything that can be attached to 15mm industry standard rods.

Adjustable height: the rail block can be moved up/down.

There are ONE 1/4" thread, TWO 3/8" thread on the bottom plate so that you can mount it to a TRIPOD.

All the parts of our baseplate pro were made of aluminum alloy.

Lanparte C-shape cage: 1 pcs

C-shape support cage for 15mm rods dslr rig

Unique design: You can Expand the the c-shape cage space so that you can easily mount your DSLR Cameras.

There are TWO thread: 3/8" thread and 1/4" thread.

Only 0.5kg net weight.

Usually works with our Top Handle.

Please visit following link to watch a video introduction.

http://www.youtube.com/user/TheCOOLLCD#p/u/1/miyivHOH-Zw

Black Aluminum Alloy 15mm Rod - 30cm: 2pcs

Made of Aluminum Alloy.

Inner thread is M12 on both sides, that is, 12mm thread. So that you can extend the rod with a M12 thread rod.

Net weight: 82g

The DIY Comb is only one of the use. You could Diy your own Rig.

For more details about the combo, refer to COOLLCD: http://www.coollcd.com/lanparte-tripod-rig-for-hd-video-c...