CoiNel CoLinkEx Debugger for Cortex-M0 and Cortex-M3

June 20, 2012 - PRLog -- The board comes with CooCox CoLink driver installed enabling user to start with the debugging the moment they recieve the hardware.

The CooCox CoLink Debugger supports
   Keil RealView MDK 4.03 or higher (not include 4.13a)
   IAR Embedded Workbench 5.xx or higher
   CooCox CoFlash
   CooCox CoIDE

More detail on this product kindly go through the following link,

http://coineltech.com/index.php?main_page=product_info&cPath=10&products_id=20


Features:

   Device Support: Cortex M0 and Cortex M3 based devices
   Supports JTAG (20 PIN Standard Box header 2.54mm) and SWD (10 PIN Box Header 1.27mm)
   Supports CoFlash, CoIDE, MDK and IAR
   Board Dimensions: 50 x 35 mm
   PCB: FR-4, 1.6 mm, Green or Red soldermask.
   Open Source Design from CooCox
 
 
Supported devices

JTAG Debugging:

NXP:

   LPC1751   LPC1752   LPC1754   LPC1756   LPC1758   LPC1759
   LPC1763   LPC1764   LPC1765   LPC1766   LPC1767   LPC1768   LPC1769

SW Debugging:

   LPC1111x101   LPC1111x201   LPC1112x101   LPC1112x201
   LPC1113x201   LPC1113x301   LPC1114x201   LPC1114x301
   LPC11C14x301   LPC11C12x301
   LPC1224x101   LPC1224x121   LPC1225x301   LPC1225x321   LPC1226x301      LPC1227x301
   LPC1311   LPC1313   LPC1342   LPC1343
   LPC1751   LPC1752   LPC1754   LPC1756   LPC1758   LPC1759
   LPC1763   LPC1764   LPC1765   LPC1766   LPC1767   LPC1768   LPC1769


We have tested the board for NXP based Cortex M0 and Cortex M3 controllers.

The board also works for various controllers from ATMEL, ST, TI, Energy Micro, Holtek and Nuvoton

The details are available at
http://www.coocox.org/Colinkex.htm

CooCox CoLinkEx Debugger is designed as per guidelines provided by CooCox that works on open source ARM development tools.