500GPM mud solids control system

July 20, 2012 - PRLog -- I.Brief introduction

GN500GPM mud treatment system is designed and manufactured according to clients’ requirements. Its handling capacity is 500GPM. This system is composed of three classes solids control equipments. ①First class: 1 sets GNPS703 balanced elippitical shale shaker for sieving seperation; http://www.gnsolidscontrol.com/shale-shaker/ ②The second and third class : 1 set GNPJ703 mud cleaner http://www.gnsolidscontrol.com/mud-cleaner/ and 2 sets SB6x5-12 sand pump. Its main principle is adopting sand pump to supply enough power for hydrocyclones, then ,drilling fluids can be under centrifugal separation through hydrocyclone cones; Meanwhile, install 1 set SLH150-35 jet mud mixer in the tank. By this mean, it can add and mix mud to supply satisfied drilling fluids for drilling rigs. http://www.gnsolidscontrol.com/fluids-processing-system/

II. Main function
1. This system consist of 3 classes solids control processing.:a.shale shaker sieving separation ; b. desander hydrocylone separation; c. desilter hydrocylone separation can discharge most particles size more than 20μm in drilling fluids.
2. Adapted shaker screen for GNPS703 balanced elliptical shale shaker: 1250×700mm ，40―100 mesh pyramid shaker screens.
Adapted under fluids shaker screen for GNPJ703 mud cleaner  1250×700 ，100～180 mesh pyramid stainless steel frame screen.  
3、designed capacity：≤660GPM，rated capacity：500GPM.
Adapted temperature：-15°～50°.
4、viscosity：≤80 S .
5、climate condition：rain、snow、fog, etc…
6、can contentious working under rated power .
7, the working height range: ≤ 2500 m above sea level can work normally, at an altitude ≥ 2500 m down effect may work.
8, all the equipments of the system are mature technical new products. Technical performance meets relevant requirements.SY/T5612-2007 “Oil gas drilling solids control equipment design specifications, "
9, The system is design reliably, and with compact instruction, flexible combination of advanced technology. It is easy for operation and maintenance. And its performance safety and reliability.
10, the system is easy to disposal, transfer and transport. It can meet the domestic and international road transport regulations.

III.working process:
The GN500GPM mud treatment system is applied for recycling, cleaning the drilling fluids coming from the drilling rig.Through the user-own mud pump, mud can be sent to inlet manifolds of the system. this system can eliminate sands less than 20μm in size, and supply drilling rigs with satisfied drilling fluids.