NXP based CORTEX-M4 LPC4088 Development Kit (MiO) from CoiNel

Nov. 29, 2012 - PRLog -- LPC1788 is suitable for various advanced applications that require high end display connectivity options.

For more information on this development tool, kindly go through

www.coineltech.com

The sample code is provided for every peripheral that’s on board. Along with it, the schematic, required software and tools are provided using which you can start with your application development from day one.

LPC4088 is suitable for various advanced applications that require high end display connectivity options.

The LPC4088 MiO has a 20 pin Wiggler-compatible JTAG interface and a SWD interface which can be used for debugging/programming.

The board can be debugged/programmed using parallel JTAG, CoiNel USB JTAG and other compatible debuggers like ULink2, ULink Me, ULink Pro, JLink ARM, Red Probe etc.

Note: Display Options for LPC4088 MiO are sold separately and are not the part of MiO Package.

Features of LPC4088 MiO

MCU: LPC4088. Package: BGA-208. Pin Compatible with LPC2478/LPC1788
External SDRAM – MT48LC64M4A2 (256 MBits X 2)
FLASH – AT25DF641, Interface – SPI (optional)
20 PIN 2.54 mm JTAG Header, 10 pin 1.27mm SWD/JTAG Connectivity options.
On Board Reset and ISP
On Board 12 Mhz Clock
On Board 32.768 Khz Clock for RTC
Micro SD Card Interface via MCI
Option to connect Graphical LCD (TM12864H6CCOWA)
On Board Test LED and Buzzer
USB Device (USB1)
USB Host (USB1 and USB2)
On Board POT connected via ADC 0.0
On Board CAN Transceiver (MCP2551) – CAN1
2 x UART (RS232) – UART0 and UART2 + TTL Outputs for UART0 and UART2
On Board PS2 Keyboard Connectivity Option
Two switches via GPIO
Ethernet Connectivity via DP83848 PHY
40 PIN TFT (24 Bit datalines) Header including SPI and I2C on same header
Audio Amplifier. Connected via DAC Out with 3.5mm audio jack.
Pin Outs for GPIO including I2c, SPI, ADC etc
Internal RTC with CMOS Battery (2032) Connectivity Options.
On Board Power Supply for 5V and 3.3V

Display Options for LPC4088 MiO

1.  7 inch Display

The details of the 7 inch Display

Part Number: KWH070KQ13-F02
Common connectivity Options on 7 inch Display Board

EEPROM (24LC256) . Interface: I2C
Accelerometer. 3 axis, Interface: I2C

7 inch Display is available in two variants

7 inch TFT with Touch (AD7843/46). Interface: SPI

7 inch Display only

KEY DELIVARABLES

LPC4088 MiO
128x64 GLCD (TM12864H6CCOWA)

USB A to B Cable

7.5 V/1Amp Adapter

CD Containing schematic, source codes, software, documentation and related details.

JTAG Options for Debug/Programming:

Parallel Port JTAG (tested on Keil, Rowley CrossWorks)

CoiNel ARM USB JTAG (tested on Keil, Rowley CrossWorks)

CoiNel CoLinkEx (tested with Keil, CooCox CoIDE)

The Board can also be used with other JTAG Debuggers.

The details on how to use the JTAG and its associated plugins are provided with the documents and also can be downloaded from Download and Support sections.

ISP Programming:

Programming can be done through the on chip boot loader using UART interface (UART0). You will have to use a TTL to RS232 Converter to do so since the pinout are TTL logic and PC uses RS232 logic. The tool used for programming is Flash Magic (http://www.flashmagictool.com/)

Programming using CoFlash

The controller can be Programmed using CoFlash from CooCox. The binary file needs to loaded using this tool. Check using CoFlash for more details.

To use CoFlash, you would need CoiNel ARM USB JTAG or CoiNel CoLink Ex Debuggers.

USB Boot Loader:

The Board can also be programmed via USB Secondary Bootloader. Check LPC4088 USB Boot Loader for more details.

TOOLS:

Our products can be used with majority of IDE and plugins that support CORTEX M4 LPC40xx family. A few IDE and plugin details are given below.

Keil uvision4.53 IDE (32K code limited version can be used.)
Rowley Crossworks (http://www.rowley.co.uk/arm/) (30 day evaluation version can be used.)
IAR workbench (http://www.iar.com) (32K code limited version could be used.)
CooCox CoIDE (Unlimited, open source)
GCC based open source tool chains

Plugins/Programmers:

H-JTAG, CooCox Colink, Flash Magic have been tested.

Compatible debuggers like U-Link, J-Link etc can also be used.


PRODUCT ORDERING CODE: 4088-MiO