Barite Recovery Centrifuge & High Speed Centrifuge Combination for Solids Control

Dec. 23, 2012 - PRLog -- In solids control system. Centrifuges are used to remove very fine solids particles, Because these fine particles affect mud rheological parameters in a much greater degree than the coarser particles therefore centrifuges can effectively control mud rheological properties and penetration rate in a favorable range by removing extra-fine particles. Besides this function. Centrifuge also are used to recovering barite while discarding fine particles from weighted mud.
http://www.gnsolidscontrol.com/decanting-centrifuge/

If the drilling mud is weighted mud. Normally the solids control system has 2 centrifuge.  one is barite recovery centrifuge, the other one is high speed centrifuge. The solids predominantly barite from the underflow of the first barite recovery centrifuge are recovered and introduced to the mud circulating system and the liquid phase retaining fine solid particles comes out from overflow port and is discharged to a tank and then is pumped to feed the second centrifuge- High speed centrifuge. The solids separated by the second High Speed unit that come out from overflow port is returned to the circulating system. GN Solids Control is a API certified Solids Control Equipment Manufacturer. The GNLW452S Centrifuge and GNLW363G centrifuge are often being combined in Solids Control System to process weighted mud.  GNLW452S is Mid-speed Centrifuge. It is used to recovery barite, GNLW363G is a high-speed Centrifuge. It is used to separate the Ultra-fine solids in the mud..
http://www.gnsolidscontrol.com/fluids-processing-system/

Any drilling contractor interested in barite recovery Centrifuge and high speed centrifuge. Please feel free to contact with GN Solids Control.