Mold No More - 100% Effective for Removing Toxic Mold

LOS ANGELES - Oct. 7, 2014 - PRLog -- Fix leaky plumbing and leaks in the building envelope as soon as possible. Watch for condensation and wet spots. Fix source(s) of moisture problem(s) as soon as possible. Prevent moisture due to  condensation  by  increasing surface temperature or reduce the moisture level in air (humidity). To increase surface temperature, insulate or increase air circulation. To reduce moisture level in air, repair leaks, increase ventilation (if outside air is cold and dry), or humidify( if outdoor air is warm and humid).

Keep heating, ventilation, and air conditioning (HVAC) drip pans clean, flowing properly, and unobstructed. Vent moisture-generating appliances, such  as dryers, to  the outside where possible. Maintain low indoor humidity, below 60% relative humidity(RH), ideally 30-50%, if possible. Perform regular building/HVAC inspections and maintenance as scheduled. Clean and dry wet or damp spots within 48 hours. Don't let foundation stay wet. Provide drainage and slope the ground away from the foundation.

If you are unsure what to  do, or if the item is expensive or of sentimental value, you may  wish  to  consult a specialist. Molds can not only Damage your Health but Can Damage Building Materials and Furnishings. This is why it is important to  consult a company that not only has the right equipment but the knowledge and know how to  effectively use it.

IndoorEnviroControl  is a company that is now offering the latest tecniques and has the latest equipment  for testing and removing toxic materials. With over 25 years as a Certified Environmental  Hygienist  Hank Taylor and his wife Merley Martinez Taylor are now offering their clients the assurance their problems will  be professionally handled. Their work  comes with a 10year warranty when completed  by their professionally trained Certified Crews.

Contact Hank Taylor and schedule an appointment at

949-560-0945 or Email  moldmen@att.net

Web Pages www.moldmen.com