Different features of solids control decanter centrifuge

XI'AN, China - Dec. 16, 2016 - PRLog -- Decanter centrifuge is also referred to decanting centrifuge, or centrifuge decater. In drilling mud process, it is the 5th purification equipment or the 4th solids control equipment. Usually, centrifuge will be set behind desilter cones or mud cleaner.

Features of decanter centrifuge in solids control

Solids control decanter centrifuge is able to get rid of particles as fine as 2 microns. According to drum speed, there are slow speed, middle speed, and high speed centrifuge. Popular solids control decanter centrifuge speed is from 1800rpm to 4000rpm. The capacity is from 30m³/h to 60m³/h .

Many clients will prefer the VFD panel on high speed decanter centrifuge. Such centrifuge will provide finer separation point than middle speed one, and larger capacity than fixed frequency high speed centrifuge.

Capacity of centrifuge is affected by rotation speed, as well as internal drum size, the power of driving motor. Select proper centrifuge should be based on whole mud system capacity, the mud property, the result we prefer. Such as, do we need to discard drilling cuttings or recycle the barite.

Types of solids control centrifuge

For solids control centrifuge, almost are horizontal type. And they are horizontal swirl decanting centrifuge. Types including middle speed, high speed, the fixed frequency and VFD centrifuge

Usually, if 2 centrifuges holding similar volume driven by same power motor. The higher speed centrifuge will process less drilling fluid, or discard less cuttings. Nowadays, more and more users prefer the VFD high speed centrifuge with large flow rate. Such as the 580x1800, means bowl diameter is 580mm, length is 1800mm.http://www.aipusolidcontrol.com/html/products/centrifuge....

The large flow rate high speed centrifuge provide more efficiency to users. High speed ensure the finer cuttings separated out of drilling fluid. For the weighted drilling mud, the barite will be recycled easily

Which type of centrifuge is proper for you?

Similar as other solids control equipment. Select centrifuge properly should be based on general working condition. The achievement we need. When we drill an oil well deeps 4000m. Consider the mud flow rate, drilling cuttings condition, also the budget middle speed centrifuge is more proper for user.

Oil and gas wells are drilled all over the globe with different geology condition. Including the onshore and offshore platform. Nowadays, environmental protection is treated significantly serious. Even for piling, HDD, TBM, we request the centrifuge to separate fine solid or recycle the water

No matter where will you use the centrifuges, you will get proper centrifuge at Aipu solids control. Tell us the requirements and detail achievement you need. High quality solids control centrifuge at best price will be offerred to you soon