CFPA Reminder: Change Your Clocks, Change Your Smoke & Carbon Monoxide Detector Batteries

OLD SAYBROOK, Conn. - Oct. 14, 2021 - PRLog -- The CT Fire Police Association (CFPA) wants to remind everyone that only working smoke and CO (Carbon Monoxide) detectors can make the difference between life and death.

That's why we are joining fire departments nationwide in promoting the annual Change Your Clock, Change Your Battery campaign on Sunday, November 7, 2021

CFPA Public Information Officer (PIO), Max Sabrin encourages all residents to adopt this simple, life-saving habit. "It's an easy, inexpensive, and proven way to protect your family and your home," says PIO Sabrin.

When you change your clocks, remember to change the batteries in your smoke & carbon monoxide detectors, and please take a moment to perform the suggested maintenance outlined below.

Replacement: Replace your smoke detector battery once a year. (Choose a specific date, such as when you are updating the time on your clocks.) When a battery is running low, the detector will "beep," indicating that the battery needs to be replaced. Do not use rechargeable batteries.

If you have a "nuisance detector" that goes off frequently with cooking fumes or humidity from the bathroom, do not remove the battery. Move the detector farther from the kitchen or bathroom. If the problem continues, you may wish to change to a different type of detector. A photo-electric smoke detector may meet your needs.

Smoke detectors also need to be replaced every 10 years and CO (Carbon Monoxide) detectors need to be replaced every 5-7 years. Wired-in smoke detectors require testing, as well, and also have a failure rate. Please refer to the owner's manual or change them every 10 years.

According to the National Fire Protection Association, the maximum life cycle of a smoke detector is 10 years from the date of manufacture, not the date of installation. Beginning in 2002, all smoke detectors must have a manufacture date marked on the outside of the smoke detector. If your smoke detector does not have a manufacture date, then it is older than 10 years and must be replaced.

Testing: Test your smoke detector every month by pressing the "test button" on the face of the detector. If your detector fails, replace the battery and repeat. If it continues to fail, replace the detector.

The peak time for home fire fatalities is between 10 p.m. and 6 a.m. when most families are sleeping. A working smoke detector can provide the critical extra seconds needed to get people out safely.

Connecticut Fire Police Association | CtFirePolice.Org (https://www.ctfirepolice.org/)