MCKINNEY, Texas -
Feb. 28, 2022 -
PRLog --
4 tips for mopping tile floors1.- Leave the area to be cleaned free of objects.
2.- Vacuum or dry mop all dust from tile floor
- If the tile floor has white construction dust, use sand to sweep and with a 32" flat mop sweep the entire surface and remove the sand from the surface.
- We recommend using a commercial bucket with a yellow wave breaker.
- The head of the mop no less than 24 oz of thread to be able to pick up all the dirt
- Use a neutral PH floor cleaner from 7 to 9 PH to avoid damaging the material.
3.- Prepare the water with a floor cleaner and clean the entire tile floor
- Always after the first mop change the water and use clean water to re-mop the area.
- If it is very dirty or has construction dust, you should change the water and re-mop the area at least 4 times.
4.- Dry tile floor with a clean mop and use fans for quick drying.
- After drying, you could check if the tile floor is clean.
- to clean the grout use an electric brush or manual brush on the area of the grout that you want to clean (Never use acid cleaners they damage the tile)
Conclusion:
Grout floors need regular maintenance and if it is a high traffic area it is recommended daily. Use little soap so it won't be sticky and dry the floors well for safety