1x6 Chosera Water Stones Professional sharpening stones

ALASKA, Australia - April 10, 2022 - PRLog -- -- Premuim water stones for high end knives

-- Compaitble with the Jende JIGS for Knives, Edge Pro, Hapstone and TSProf sharpening systems

-- 5-6mm thick stones mounted on standard aluminium blank

-- Fast cutting and polishing action

-- For use with water only

The 1x6 Naniwa Chosera Stones all fit perfectly in any Jende JIGS for Knives, Edge Pro, Hapstone and TSProf guided sharpening systems. These stones measure 1" x 6", and are a beefy 6 mm thick and come mounted on an aluminum blank. These are the highest premium quality stones and are well known for their wonderful feedback and fast action. One of the biggest advantages with these stones is the variety of hardness between the different grits, which can be used advantageously on harder or softer steels. They also have a very high grit density and work best with a quick soak before use. See all other Naniwa Grit stone

Coarse Grits (#400, #600, #800) are aggressive, and geared toward stock removal, repairs, and (re)profiling. They are also excellent at removing the deeper scratches from diamond plates. The #400 is a very solid, hard and aggressive stone that does not wear easily. The #600 is a softer stone that has a sensational, "buttery"  feedback to it, and excels on harder steels. The #800 is still technically a coarse stone, but it also leaves a very good basic working edge. It is a real workhorse.

Medium Grits (#1,000, #2,000, #3,000) refine the edges on most tools and knives to working sharp levels, and quickly perform maintenance on dulled knives. They are still aggressive enough to do minor repair and profiling work, and they set the stage for the fine grit polishing stones. The 1K is one of the best stones in the series, and is aggressive enough for most maintenance while leaving an edge that is slightly more refined than other 1K stones. The 2K grit is a softer stone, and produces an excellent "good enough" edge on softer steel knives (HRC~55 and below). The 2K stone is made even more effective when combined with the #800 Chosera stone. The 3K stone is a harder stone, and is the perfect choice for a working edge on a quality knife, and for setting the edge up for the polishing stages.

Fine Grits (#5,000, #10,000) bring every edge to a whole new level, and where cutting becomes effortless. The 5K is a softer stone, with wonderful feedback. It produces a mirror finish that takes the edge to a whole new level. The 10K takes the mirror even further, while refining the edge to "shaving sharp" levels.

https://jendeindustries.com/1x6-naniwa-chosera-stones.html