Bentonite Slurry Separation System /bentonite Recycling System Used For Piling Engineering

April 27, 2010 - PRLog -- GN solids control can produce bentonite slurry separation system or bentonite recycling system. Our equipments are widely used in piling engineering.

http://www.gn-desander-desilter.com/

What is piling?
Piling is a fast moving field and recent years have seen major advances in theory, methods, testing procedures and equipment. Some of these changes have been driven by the need for economies and efficiency, reduced spoil production and new methods of pile bore support. Advances in theoretical analyses allow pile design to be refined so that piles and pile groups perform to better advantage.

What project piling engineering is used for?
Piling engineering is the first step in the construction of bridges and offshore platforms.

http://www.gnsolidscontrol.com/drilling-fluids/bentonite-mixing-unit-mud-tanks-hdd

However, limitations in the real-time determination of the positions of piling pickets exist.For instance, requirement of line of sight, lack of real-time positioning capability and fragile to the hostile observation environment are typical problems for the traditional surveying techniques.

The use of real-time kinematic Global Position Ssystem (RTK GPS) can integrate the fiel measurements with the real-time computation into a uniform positioning system, which can，significantly improve the productivity and efficiency of the whole system. In this paper, the authors propose a real-time piling positioning system for the determination of the pickets.Relevant algorithms and models are presented. As a case study, results of the developed system for a piling project at a biggest cross-sea bridge, Donghai Bridge in Shanghai of China are introduced.

http://oilfield.gnsolidscontrol.com/complete-bentonite-re...

Bentonite recycling system produced by GN

The tank are divided into 3 compartmentst,from right to left are A,Shale Shaker compartment B,desander compartment C,Mixing compartment .The Return Pump feed mud to the shaker,and after the treatment of shaker goes to the shaker compartment. Then mud overflow to desander compartment, and then circulation pump suck mud from desander compartment to feed the desander cones,after dedander cones treatment,the clean mud (particls size≤47microns)goes to the mixing tank.The mixing hopper and the marching sand pumps as well as the mixing compartment circulate for mixing bentonite.The mud in the mixing compartment are recovered bentonite mud which is usable.
Contact GN solids control for more information.

# # #

GN-Solids control is a China solids control equipments professional manufacturer.Our solids control equipments can be used in both onshore and offshore oilfield for oil gas well drilling fluids circulation-Drilling mud complete solids control.