CoiNel Technolgy launches development tool for NXP's Cortex-M3 LPC1788 MCU (LPC1788 MiO Board)

June 28, 2012 - PRLog -- LPC1788 is suitable for various advanced applications that require high end display connectivity options.

The sample code is provided for every peripheral that’s on board. Along with it, the schematic, required software and tools are provided using which you can start with your application development from day one.

For information this development tool kindly go through the following link

http://coineltech.com/index.php?main_page=product_info&cPath=8&products_id=24

The LPC1788 MiO is based on Cortex M3 Core, running at up to 120MHz.  The MiO lets you quickly start with your development on LPC1788 based designs.

The LPC1788 MiO has a 20 pin Wiggler-compatible JTAG interface and a SWD interface which can be used for debugging/programming.

The board can be debugged/programmed using parallel JTAG, CoiNel USB JTAG, CoiNel CoLinkEx Debugger and other compatible debuggers like ULink2, ULink Me, ULink Pro, JLink ARM, Red Probe etc.

Note: Display Options are sold separately and are not the part of MiO Package.

Demo on this board as follows

1. LPC1788 MiO Description
http://www.youtube.com/watch?v=Hf1_E3Xqm-E




Features of LPC1788 MiO

   MCU: LPC1788. Package: BGA-208. Pin Compatible with LPC2478
   External SDRAM – MT48LC64M4A2 (256 MBits X 2)
   FLASH – AT25DF641, Interface – SPI (optional)
   20 PIN 2.54 mm JTAG Header, 10 pin 1.27mm SWD/JTAG Connectivity options.
   On Board Reset and ISP
   On Board 12 Mhz Clock
   On Board 32.768 Khz Clock for RTC
   Micro SD Card Interface via MCI
   Option to connect Graphical LCD (TM12864H6CCOWA)
   On Board Test LED and Buzzer
   USB Device (USB1)
   USB Host (USB1 and USB2)
   On Board POT connected via ADC 0.0
   On Board CAN Transceiver (MCP2551) – CAN1
   2 x UART (RS232) – UART0 and UART2 + TTL Outputs for UART0 and UART2
   On Board PS2 Keyboard Connectivity Option
   Two switches via GPIO
   Ethernet Connectivity via DP83848 PHY
   40 PIN TFT (24 Bit datalines) Header including SPI and I2C on same header
   Audio Amplifier. Connected via DAC Out with 3.5mm audio jack.
   Pin Outs for GPIO including I2c, SPI, ADC etc
   Internal RTC with CMOS Battery (2032) Connectivity Options.
   On Board Power Supply for 5V and 3.3V





KEY DELIVARABLES

   LPC1788 MiO
   USB B Connector
   CD Containing schematic, source codes, software, documentation and related details.


LPC1788 Features

   ARM Cortex M3 Core
       Upto 120 MHz Operation
       Nested Vector Interrupt Controller (NVIC) for fast deterministic interrupts.
       Wakeup Interrupt Controller allows automatic wakeup from any priority interrupts.
       Memory Protection Unit.
       Four reduced power modes – sleep, deep sleep, power down, deep power down.

   Memories
       512 KB Flash.
       96 KB SRAM
       4 KB EEPROM

   Serial Peripherals
       10/100 Ethernet MAC
       Two Full Speed USB
       Four UART and one USART
       Two CAN 2.0B controllers.
       Three SSP/SPI controllers.
       Three I2C Interface.
       I2S Interface for digital Audio.

   ANALOG Peripherals
       ADC - 12 Bit with eight Channels
       DAC – 10 Bit, One channel

   Other Peripherals
       LCD controller, supporting both STN and TFT displays
       RTC with event recorder for tamper detection.
       Eight channel DMA Controller
       Upto 165 GPIO
       Motor Control PWM with quadrature encoder interface.
       Four 32 Bit General purpose Timer/Counter with eight capture and 10 compare outputs.