MTP/MPO Pre-terminated High Density Multi-Fiber Cable Solution

SHENZHEN, China - Oct. 8, 2013 - PRLog -- The MPO Connector is the industry acronym for "Multi-fiber Push On", with push-on insertion release mechanism, provides consistent and repeatable interconnections and available with 4, 8, 12, or 24 fibers. The MTP/MPO is a connector manufactured specifically for a multifiber ribbon cable. The MTP/MPO single-mode connectors have an angled ferrule allowing for minimal back reflection, whereas the multimode connector ferrule is commonly flat. The ribbon cable is flat and appropriately named due to its flat ribbon-like structure, which houses fibers side by side in a jacket.

The MTP/MPO System Is Ideal For Many Applications Including:

*Disaster Recovery

*Backbones

*Building Fiber Optic Distribution

*Quick setup of new wiring hubs

*Warehouses

MTP/MPO Pre-terminated  High Density Multi-Fiber Cable Solutions:

Visit http://www.fiberstore.com/c/mpo-mtp-fiber-cables_899 for detials

*MTP / MPO Patch Cable

*MPO / MTP standard trunk cable

*MPO / MTP hybrid trunk cabble

*MPO / MTP harness cable

*Easy plug and play cassette module

MTP / MPO Cable Assemblies:

With its higher port density, MTP fiber is easier to install Multimode
10Gb OM3/OM4

MPO / MTP standard trunk cable:

24 Fiber, 48 Fiber, 72 fiber and 144 Fiber Opitc Trunk Cables, Singlemode, just pull 1 cable with 12 fibers for one easy plug-in.

MPO / MTP Hybrid Trunk Cabble

• For fanout the fibers from MPO/MTP connectorsinto individual simplex or duplex connector
• To install directly into system equipment ports or patch panels
• MPO/MTP on one end, with single-fiber connectors on another end
• Fiber counts available in 12 / 24 / 36 / 48 / 72 /96 / 144-fibers• Single-fiber connector interface available in SC, ST, LC, MTRJ in forms of Simplex or Duplexchanneling
• Customized furcation length to cater for differentinstallation situations
• Ruggedized furcation legs: Round fanout kit with 2.0 mm or 3.0 mm legs to single-fiber connectors

MPO / MTP Harness Cable

• For transition from trunk backbone assemblies to fiber rack system
• MPO/MTP on one end, with single-fiber connectors on another end
• MPO/MTP connector in 8 or 12-fiber interface forchoices
• Fiber counts available in 8 / 12-fibers
• Single-fiber connector interface available in FC, SC, ST, LC, MTRJ, E2000 in forms of
Simplex or Duplex channeling
• Customized furcation length to cater for differentinstallation situations
• Ruggedized furcation legs: Round fanout kit with 2.0 mm or 3.0 mm legs to single-fiber connectors

MTP MPO Fiber Optic Plug-N-Play Cassettes:

Awide range of single mode and multimode MPO MTP Cassettes. The standard cassettes can accommodate 12 and 24 port configurations. Different sizes of cassettes are available. Available in all fibermodes and connector options.

If you want to custom some other mtp/mpo products: such as MPO / MTP Direct Harness Cable, MPO / MTP Hydra Cable, MTP MPO Fiber Optic Cassette Rack Mount Holders, MPO/MTP Adapters, MTP MPO Fiber Optic Loopback Tester cable. Please connect us!