DONG GUAN, China -
Sept. 2, 2024 -
PRLog -- Encountering challenges with your chained terminal crimping machine? Let's explore some common problems and their straightforward solutions to help you get back on track.
Inconsistent Stripping Length - Possible causes: The feed roller may be too tight or loose, or the cutting blade might not be set at the correct depth.
- Solutions: Adjust the feed roller gap to ensure the wire isn't flattened or slipping. Fine-tune the cutting blade depth for a clean cut without damaging the copper wire. If the issue persists, consider replacing the cutting blade.
Uneven Copper Exposure on Crimped Terminals - Possible causes: The guide tube might not be aligned with the wire, the blade may not be perpendicular to the guide tube, the auxiliary press block could be loose, or the distance between machines may have shifted.
- Solutions: Carefully inspect and adjust the guide tube, blade, press block, and machine distance to ensure they are correctly aligned.
Machine Won't Start or Stops Mid-Cycle - Possible causes: Insufficient power or air pressure, a blockage within the machine, or a problem with the signal or power connection.
- Solutions: Verify the power supply and air source, clear any blockages, and ensure all connections are secure.
Inconsistent Electronic Wire Cutting Length - Possible causes: The cutting blade might be worn out, or the feed roller pressure could be incorrect.
- Solutions: Replace the cutting blade and adjust the feed roller gap.
If you continue to experience difficulties, refer to your machine's user manual or consult a technician for specialized assistance.
https://www.fortunesky-tech.com/products/versatile-wire-t...https://www.facebook.com/watch/?v=25167871742827202https://youtube.com/
shorts/Rc0nQpEZX3k
Account Phone Number