Some requirements for disc-type scaffolding

CHANGSHA, China - Oct. 16, 2024 - PRLog -- 1. The vertical pole should not be lower than the provisions of Q345 in GB/T1591; the horizontal pole and horizontal diagonal pole should not be lower than the provisions of Q235 in GB/T700; the vertical diagonal pole should not be lower than the provisions of Q195 in GB/T 700.
2. The mechanical properties of the steel plate of the adjustable support and adjustable base should not be lower than the provisions of Q235 in GB/T700; the mechanical properties of the hollow adjusting screw should not be lower than the provisions of grade 20 steel in GB/T 699; the mechanical properties of the solid adjusting screw should not be lower than the provisions of Q235 steel in GB/T700.
3. When the vertical pole connection plate is made of carbon cast steel, its mechanical properties should comply with the provisions of ZG230-450 in GB/T11352; when it is made of round steel hot forging or steel plate punching and pressing, its mechanical properties should not be lower than the provisions of Q235 in GB/T700.
4. When the bolt is made of carbon cast steel, its mechanical properties shall not be lower than the provisions of ZG230-450 in GB/T11352; when it is made of round steel hot forging, its mechanical properties shall not be lower than the provisions of 45 steel in GB/T 699; when it is stamped with steel plate, its mechanical properties shall not be lower than the provisions of Q235 in GB/T700.
5. When the connecting outer sleeve is made of carbon cast steel, its mechanical properties shall comply with the provisions of ZG230-450 in GB/T11352; when the outer sleeve is formed into a step-shaped inner wall by extrusion process, its mechanical properties shall not be lower than the provisions of Q235 in GB/T700; when the outer sleeve is made of seamless steel pipe, its mechanical properties shall not be lower than the provisions of Q345 in GBT1591; the inner insert is made of seamless steel pipe or welded pipe, and its mechanical properties shall not be lower than the provisions of Q235 in GB/T700.
6. The buckle joint is made of carbon steel, and its mechanical properties should comply with the provisions of ZG230-450 grade in GBT11352.

https://www.hunanworld.com/
https://www.world-scaffold.com/